Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How easy to fit a bass stop to a Morgane?  (Read 4684 times)

0 Members and 1 Guest are viewing this topic.

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
How easy to fit a bass stop to a Morgane?
« on: December 01, 2009, 09:27:17 PM »

Anyone got any advice on how easy/difficult this would be? I really like my Morgane but being able to remove the thirds, I think would at times be a benefit.

Neil
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: How easy to fit a bass stop to a Morgane?
« Reply #1 on: December 01, 2009, 10:27:39 PM »

Nigh on impossible I would think, unless you redesigned the thing including new reeds.
Your only other option is to disable the thirds on a semi-permanant basis.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How easy to fit a bass stop to a Morgane?
« Reply #2 on: December 02, 2009, 12:09:02 AM »

Yes, I think the Morgane chord block is the same design as the Erica etc where the thirds are not segregated into one row, which is necessary if you want a stop.  You would need to make a different design of reedblock, new chord reeds, and possible have to make some changes to the action too.  Hardly worth the effort on a relatively inexpensive box. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: How easy to fit a bass stop to a Morgane?
« Reply #3 on: December 02, 2009, 12:23:53 AM »

Yes, I think the Morgane chord block is the same design as the Erica etc where the thirds are not segregated into one row,

That won't be a real problem - just rearrange the reeds, cutting the stopper sheet wouldn't be that difficult ...
(aside from that there wouldn't be enough space between the holes)
_BUT_ the thirds are not on the same reed plate (or hole) for push/pull ... for that you will need a complete new set of reeds.
I thought about doing that on my Hohner Erica
« Last Edit: December 02, 2009, 12:29:29 AM by michik »
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: How easy to fit a bass stop to a Morgane?
« Reply #4 on: December 02, 2009, 06:01:04 PM »

Thanks, guys - I'll give up on that idea!
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: How easy to fit a bass stop to a Morgane?
« Reply #5 on: December 02, 2009, 09:42:52 PM »

Would probably cost you less money just to buy another Morgane and tape the thirds! So you end up with a backup box as well  (:)
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

**DTN**

  • Derek The Nutter
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 472
  • Derek The Nutter
Re: How easy to fit a bass stop to a Morgane?
« Reply #6 on: December 02, 2009, 10:39:38 PM »

I have never paid more than £60 to add the stop to my boxes (2 off) ... castagnari etc .... of course Rees would charge double!!! >:E  only joking!
Logged
All the gear and no idea! .... DTN   "Hampshire UK"

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How easy to fit a bass stop to a Morgane?
« Reply #7 on: December 02, 2009, 11:14:45 PM »

That's ok for an Italian box where the thirds are all lined up on one side of the reedblock.  Hohners are much less accommodating.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How easy to fit a bass stop to a Morgane?
« Reply #8 on: December 03, 2009, 11:29:54 PM »

That's ok for an Italian box where the thirds are all lined up on one side of the reedblock.  Hohners are much less accommodating.

So am I.  :-*
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: How easy to fit a bass stop to a Morgane?
« Reply #9 on: December 05, 2009, 11:35:49 AM »

That's ok for an Italian box where the thirds are all lined up on one side of the reedblock.  Hohners are much less accommodating.

I'd have to look at a Morgane to see how much space there is between the openings, but wouldn't it be possible to make slides that have an opening pattern such that the "non-thirds" are "open" in both slide positions?  I'm not sure whether I'm expressing my idea clearly.
-Andy

dr.harp

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: How easy to fit a bass stop to a Morgane?
« Reply #10 on: December 05, 2009, 04:01:42 PM »

That's ok for an Italian box where the thirds are all lined up on one side of the reedblock.  Hohners are much less accommodating.

I'd have to look at a Morgane to see how much space there is between the openings, but wouldn't it be possible to make slides that have an opening pattern such that the "non-thirds" are "open" in both slide positions?  I'm not sure whether I'm expressing my idea clearly.
-Andy

Andy in Vermont is correct in that it would be possible. By positioning the thirds in certain spaces on one side of the block, a slide could be constructed that would close the thirds (obviously reeds would need to be altered to ensure the thirds for the push/pull chords were paired on the same reedplate while roots and fifths may also need to be re-positioned) while allowing the other reeds to play. The slide would need holes slightly smaller than the holes in the block to offset the smaller space between the different chord groups.
Logged
Owner of Wilson Music Services - Repairs to accordions and harmonicas, specializing in Hohner.

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: How easy to fit a bass stop to a Morgane?
« Reply #11 on: December 05, 2009, 04:37:42 PM »

How does one "alter the reedplates to ensure that the thirds for the push/pull chords were paired on the same reedplate while roots and fifths may also need to be repositioned" short of cutting every plate in half?
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: How easy to fit a bass stop to a Morgane?
« Reply #12 on: December 05, 2009, 04:50:03 PM »

You would need new reeds.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: How easy to fit a bass stop to a Morgane?
« Reply #13 on: December 05, 2009, 05:03:05 PM »

That is what I thought and said (along with Theo and Michik) but stand to be corrected ;)
Logged

dr.harp

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: How easy to fit a bass stop to a Morgane?
« Reply #14 on: December 05, 2009, 05:14:27 PM »

Either by re-tuning a reed on a reedplate to the required note or replacing reedplates with ones that have the desired notes. For example, on a D/A push/pull combination the normal chord plates are a/a, d/c# and f#/e (thirds underlined). To reconfigure you would keep the a/a, retune and invert (or replace) the d/c# to d/e and, finally, replace or retune (although e down to c# is quite a step) the f#/e to f#/c# - it would be easier to just replace this plate (the f#/c# combination reedplate exists on a 3 voice accordion tuned EAD). Voila - your thirds are now on a common plate and your chords play as they did.
Logged
Owner of Wilson Music Services - Repairs to accordions and harmonicas, specializing in Hohner.

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: How easy to fit a bass stop to a Morgane?
« Reply #15 on: December 06, 2009, 12:44:08 AM »

All good info, guys - unfortunatey to me it's a bit like looking under the bonnet of a car - where do you start and should you? My original thoughts were, that given what seem like pretty high prices for new DBAs (especially in the current financial climate), to make something more of what you've got and what you like makes some sense. I don't really see any offers for upgraded DBA's eg a 2nd hand Castagnari Dony or Serenellini Selli fitted with stops. There must be some potential for customising them? Have those of you living in North America and elsewhere, been considering these things for longer given the availability and cost of new instruments?
« Last Edit: December 06, 2009, 12:47:58 AM by NeilA »
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: How easy to fit a bass stop to a Morgane?
« Reply #16 on: December 06, 2009, 01:57:00 PM »

On reading the concise explanation I do stand corrected and the comment that I quoted now makes sense. (Perhaps I should have read it properly first time round and diferentiated between "alter" and "relocate" )
Given that the "piano" ones would all go as they are, only half the reeds would need retuning/replacing but I am inclined to think that whatever the chord combination you will always have one plate that is too far off to easily retune.
Going back to the original question as to how easy such a modification would be. I took it that Neil was talking about this as a DIY project which is why I said it was nigh on impossible and the beginning of his last post only  reinforces that opinion (:)
There is a school of thought that says most things are possible if you throw enough effort/money at them but whether they are practical is another matter.
Now that we have drifted away from the Morgane it seems to me that if someone pays to "upgrade" an instrument to their spec. they are hardly likely be selling it on and, even if they did, would be unlikely recover the cost.
Logged

uofdoboe

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: How easy to fit a bass stop to a Morgane?
« Reply #17 on: December 06, 2009, 10:31:43 PM »

I had also thought about removing the 3rds from my D/G Morgane.  Has anyone confirmed that this is even possible?  I recall one poster on this forum commenting that many reeds were shared between chords on his Morgane - so that removing the third of one chord might also remove the root or 5th of a different chord.  I recall his was a B/C box though, so perhaps the D/G doesn't share this problem?  I don't have the confidence to crack open the box to check.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: How easy to fit a bass stop to a Morgane?
« Reply #18 on: December 06, 2009, 10:45:13 PM »

If the 3rds aren't on separate plates so you can block the air hole you can just jam the tongue with a piece of stiff paper, possibly using some tape either side to hold the card in place. Probably worth taping the reed valve closed as well so that you don't waste any air, but it's not really crucial.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal