Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 1-row G restoration  (Read 418 times)

0 Members and 1 Guest are viewing this topic.

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Hohner 1-row G restoration
« on: April 09, 2025, 10:52:31 AM »

I found this very ugly 1-row Hohner with only nine buttons and without wind button and grill. So I repaired the tenth lever and pallet and made a wind mechanism. The old Pokerwork finish was very bad, so I decided to sand it off and cover the whole instrument with oak wood veneer. For the grill I copied an old grill and made a dxf file from it and sent it to somebody with a laser cutter to cut it out on 1mm aluminium sheet.
« Last Edit: April 10, 2025, 08:04:04 AM by Fanie »
Logged

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hohner 1-row G restoration
« Reply #1 on: April 09, 2025, 10:53:51 AM »

Gluing the veneer
Logged

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hohner 1-row G restoration
« Reply #2 on: April 09, 2025, 10:54:40 AM »

With the grill. If anybody needs the dxf file to cut your own grill, I will be happy to send it to you.
« Last Edit: April 09, 2025, 10:56:31 AM by Fanie »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal