Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: cleaning rust off of reeds  (Read 3407 times)

0 Members and 1 Guest are viewing this topic.

CajunBoxPlayer

  • Member
  • *
  • Offline Offline
  • Posts: 5
cleaning rust off of reeds
« on: February 10, 2008, 08:18:33 PM »

What would you say would be the best way to remove rust spots on reeds?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: cleaning rust off of reeds
« Reply #1 on: February 10, 2008, 10:59:08 PM »

If its just a few small spots leave them as they are. If the tuning sounds ok then leave the rust where it is.

If its more then get one of these polishing blocks from an electronics store.  Fine wet and dry paper works too.  Use something thin slid under the reed to provide support.  If the back of the reed is rusty then then use the blade of a fine screwdriver to scrape the rust off.  Expect that retuning will be needed after the reed cleaning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal