Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: How do you stop it ?  (Read 4822 times)

0 Members and 1 Guest are viewing this topic.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: How do you stop it ?
« Reply #20 on: August 11, 2010, 03:01:00 PM »

Doesn't the simple PVA glue work too? Water-based, solvent free, cheap!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #21 on: August 11, 2010, 04:48:04 PM »

Doesn't the simple PVA glue work too? Water-based, solvent free, cheap!
I think there would be a high risk of the glue soaking into the felt too much and making a hard matted mass when set, and thus reducing the resilience of the felt. I was happy to go with Charlie Marshall's recommendation of Bostik, trusting his experience and wisdom. It certainly did the job quickly, cleanly and most importantly, effectively.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #22 on: August 11, 2010, 04:56:48 PM »

It has also developed an interesting new noise, not apparent before but several of the lower press note leather valves are fluttering and making dare one say here, a farting sound, as are some of the bass - first off I thought that it was the valves I had removed when flattening their reeds and had perhaps not repositioned them properly but it is as bad on some of those still intact from factory - I'm guessing that perhaps its something related to the damp weather we've just got, can't see any sign of them fluttering against the reedplate internal walls or underside of pallet table and given their age they were (surprisingly) not dry and crispy (no oiling or other treatment)  any ideas ?
I don't think it is worth trying to conserve old leather valves. Even though they may look OK, they may not be lifting properly and therefore could be fouling the reed tongue. The larger reeds have a surprising swing amplitude!  I would replace them with new leather valves and hopefully the fluttering noise will disappear.

Also, it is not a good idea to remove valves in order to tune the reeds. The presence or absence of the valve can have a significant (several cents) effect on the pitch. So always tune reeds with the valves in place.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #23 on: August 11, 2010, 06:47:23 PM »

All understood Steve, you may not have seen the pics on the thread when I first got this box as it was under makes and models

http://forum.melodeon.net/index.php/topic,4424.0.html

At some point in its history, mischevious fingers had bent several push reeds (bronze) up vertical so the damaged reed plates came off to burnish these back down, (and fit a replacement for one broken off) I made an 'anvil' with recess to take the rivets allowing the plates to lay flat - didn't think distorting these would help matters and the valves came off as part of this - waxed as opposed to glued on originally.....

Its just as well it has started making this noise now as I was on the verge of starting on the tuning (so far have been carefully excavating the plate slots to get free travel on the reeds, checking on Bills tuner as the lower reeds appeared to be drifting in tone, presumably working out the stresses induced while ironing them flat. As far as I can see  through the pallet 'oles there is no interference between valves and reed tongues and they are pretty floppy, sound similar to hoovering up a strip of paper which gets trapped in the airstream and flutters.

Is there a proper name for this stuff ? I have bought plenty of valve leather over the years but this has been 1/4" - 3/8" thick and steeped in tallow (for water or air pumps)

I agree with not using PVA or similar, the old simmer and stink glue is reversable at need and Bostick would scrape off - I still need to have a brew up as one long joint between backboard and box has come adrift and until I discover what sort of pallet cover I have to produce (tis missing and nothing like the Pokerwork size) the flexing will probably run the crack further.

Oh the joys of MAD, still, detuned, clattering and f**ting it sounds nice enough to be worth the time and trouble  :|||:

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #24 on: August 12, 2010, 12:37:56 AM »

All understood Steve, you may not have seen the pics on the thread when I first got this box as it was under makes and models

http://forum.melodeon.net/index.php/topic,4424.0.html
Ah yes, that one. Now I understand....  ;)

Quote
As far as I can see  through the pallet 'oles there is no interference between valves and reed tongues and they are pretty floppy, sound similar to hoovering up a strip of paper which gets trapped in the airstream and flutters.
Sometimes the valves develop a tendency to vibrate in resonance with the reed tongue, which can also produce the fluttering noise. As a temporary fix I have been known to weight the tip of the valve with a tiny blob of Blue-tac, which alters its resonant frequency, but the best solution is to replace the valve. It also may be that you need a valve with a wire spring and fixing dot (see link below).

It's very odd, this fluttering business. Sometimes it just suddenly develops for no apparent reason. Most annoying. It can also disappear suddenly too. A few months ago I took delivery of a new concertina, and one of the valves was fluttering. I was a bit dis-chuffed, and was contemplating sending the instrument back to the maker, but decided not to do anything in haste. Sure enough, after a few hours playing, the problem mysteriously went way.

Quote
Is there a proper name for this stuff ?
Er... Reed valve leather?
Charlie Marshall sells all different sorts and sizes. Not just leather but vileda and vinyl too.
See here.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #25 on: August 12, 2010, 12:10:37 PM »

Yes that one indeed Steve  (:)

I guess this is one reason for using plastic valves instead of leather now - the only difference I could put my finger on was it was a damp cool day rather than a dry stinky hot day when I had experience no problems and it had been sitting with the keyboard / pallets off so open to the air.

On the basis that they will need replacing I'll dose a couple with some neatsfoot oil without removing the plates and see if it has any beneficial effect - it will certainly alter the weight and maybe the flexibility.

The more I read and hear about tuning, or more specifically consistent toning,  the easier it is to put off starting on it  ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal