Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Screwed together versus pinned frames  (Read 1659 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Screwed together versus pinned frames
« on: October 27, 2010, 05:21:09 PM »

Is there any benefit of the pinned together inset frames as opposed to screwing together the double frames with the top and bottom screws?  I've only made the double frame screwed together, but am considering doing the pinned on one I intend to build for me.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Screwed together versus pinned frames
« Reply #1 on: October 27, 2010, 07:23:07 PM »

Is there any benefit of the pinned together inset frames as opposed to screwing together the double frames with the top and bottom screws?  I've only made the double frame screwed together, but am considering doing the pinned on one I intend to build for me.

The width of all the frame components -- box frame and bellows frame -- can be altered if you do this, to allow for a frame width that is narrower overall.  I don't know whether it will be evident in this photo.
I would also argue that it is a better mechanical connection for a variety of reasons, but that this improvement does not really matter because the simpler frame with two screws is probably rarely a problem.
The pins do allow an 'interlocking frame' as opposed to one that is flush-mounted.  For tuning in situ, I prefer the interlocking frame.
As a purely aesthetic consideration, it allows for different over appearance -- one which I prefer, but it is simply a question of taste.
« Last Edit: October 27, 2010, 07:27:47 PM by Andy in Vermont »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Screwed together versus pinned frames
« Reply #2 on: October 27, 2010, 08:51:57 PM »

Thanks, Andy, those are some of the reasons it appeals to me.  Mainly for something different in looks to what I'm used to seeing, and since I tune using the box on it's own bellows, it sure is easier to hold the frames together. 

My main concern is pins pushing out, like I've seen happen in H114's. I imagine that's an installation issue though.

I like those contrasting corners in the pic, is that a Melodie?

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Screwed together versus pinned frames
« Reply #3 on: October 27, 2010, 09:24:22 PM »

I like those contrasting corners in the pic, is that a Melodie?

Yes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Screwed together versus pinned frames
« Reply #4 on: October 28, 2010, 11:51:42 AM »

That is the main difference between the two models that I make.

The Clipper has screwed together frames.
The Windjammer has inset pinned frames.

I have no great preference but certainly find the Clipper type easier to construct.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal