Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed Tuning Possibilities  (Read 2661 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Reed Tuning Possibilities
« on: November 24, 2010, 12:29:49 AM »

I've been doing some research and some thinking about the removal of steel from a reed in preparation for repair and tuning of my Presswood Hohner and the Erica that should arrive next week. Given the discussions I've read about changing not only the pitch, but also the harmonics and increasing the potential for breakage, I drew some pictures of reeds with locations of where to take off material so I could think more clearly about the process. I've copied the drawing and will try to upload it.

The drawings are sketches only, and not to scale. Some or all of the areas where steel is "removed" are exaggerated for easier distinctions between the different techniques. Hope this is of help to some.

This is an example of the kind of image I'd like to see posted in a separate "Pictures" folder.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Reed Tuning Possibilities
« Reply #1 on: November 26, 2010, 01:47:56 AM »

I've been doing some research and some thinking about the removal of steel from a reed in preparation for repair and tuning of my Presswood Hohner and the Erica that should arrive next week. Given the discussions I've read about changing not only the pitch, but also the harmonics and increasing the potential for breakage, I drew some pictures of reeds with locations of where to take off material so I could think more clearly about the process. I've copied the drawing and will try to upload it.

The drawings are sketches only, and not to scale. Some or all of the areas where steel is "removed" are exaggerated for easier distinctions between the different techniques. Hope this is of help to some.

This is an example of the kind of image I'd like to see posted in a separate "Pictures" folder.

I appreciate that the drawings are "exaggerated" but still think that you over estimate the amounts of metal that need to be removed.
The first three sketches would to me illustrate the best ways to destroy a reed. They are sometimes ground in the positions shown in (4) and (7) during production but, perhaps with the exception of big ones, not half way through the thickness!
I can only echo comments made elsewhere and suggest that,  rather than experimenting on as yet unspoilt instruments, you practise on some expendable reeds first. Seeing in practical terms the difference that removing just a "lick" makes would be far more value than any amount of theorising.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed Tuning Possibilities
« Reply #2 on: November 26, 2010, 03:51:36 AM »

Thanks.

The exaggerations are there for discussion purposes only. I do know that I'd never remove half the thickness of the reed in a tuning session. It would destroy the reed. I'm only using the drawings to increase my understanding of what removal of metal across the full width of the reed would do to the profile along the edge of the reed and how that might affect the sounds produced, particularly overtones.

I suspect that removal of metal running from edge to edge of the reed will weaken the metal and change the upper harmonics in detrimental ways.

No, I have not yet touched a reed, however, I do intend to start with a junker and test different ideas for tuning and approach the process in a somewhat scientific way. Test the reed, make a change, test the reed again and see what has changed. Do the same thing to another reed and see if the effects are at all predictable. I expect I'll destroy a few reeds in the process but I'll learn a great deal in the process. I did the same thing with mirror making, and ended up with a very strong skill set. I do have to start the learning process somehow and prefer to come at it from a planned approach rather than a haphazard one. Hope that makes sense.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed Tuning Possibilities
« Reply #3 on: November 26, 2010, 11:37:15 AM »

Admittedly I haven't tried either (yet) but I can't believe that tuning reeds is more pernickety than mirror making! I think you'll be fine.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Tuning Possibilities
« Reply #4 on: November 26, 2010, 01:11:51 PM »

I've been doing some research and some thinking about the removal of steel from a reed in preparation for repair and tuning of my Presswood Hohner and the Erica that should arrive next week.

If its just "maintenance" tuning then the amount of metal you have to remove is minute and you won't significantly change the profile of the reed.  If I want to shift the pitch by a semitone or more then I usually aim for something like your sketch 1 or 2 for lowering pitch, or 7 for raising the pitch.  As far as possible I aim to leave a gentle curve to the filed area without steps or sudden changes in profile, and with as smooth a surface as possible.   My aim is to avoid creating surface features that will create stress concentrations which could lead to premature reed failure.

Once you start to experiment you will find there is a great variety of reed profile in a single instrument as you go from the lowest pitch to the highest.  There is also significant differences in the  differences between reeds of the same pitch in different makes and models.  Its really something you need to experiment with on a scrap instrument untill you get a feel for how much you can get away with.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Reed Tuning Possibilities
« Reply #5 on: November 26, 2010, 01:42:09 PM »

If you had to remove a large amount of metal to change the pitch of a reed, intuitively you would think that sketches  #5 and 10 would be the least likely to weaken the reed or cause problems with the reed sounding properly.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Tuning Possibilities
« Reply #6 on: November 26, 2010, 01:51:47 PM »

Our intuitions must vary then ;D

I doubt it makes much difference at the reed tip where bending and the consequent risk of fracture is at a minimum, but in the centre of the reed where the greatest bending occurs then pattern 10 will lead to stress being concentrated in the ridges at either side of the reed tongue.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed Tuning Possibilities
« Reply #7 on: November 26, 2010, 02:47:19 PM »

I agree with Theo.

1, 2, and 7.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Reed Tuning Possibilities
« Reply #8 on: November 26, 2010, 04:10:17 PM »

I would agree that it probably doesn't make much difference at the tip of the reed and maybe it really doesn't make much difference at the base either.  My thinking, though, was that #5 would remove mass from the base of the reed without affecting the stiffness of the reed as much as #1or2 which would reduce the stiffness of the reed at the thinnest point and concentrate the flexing there.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal