Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: removing end of melodeon  (Read 1395 times)

0 Members and 1 Guest are viewing this topic.

myra

  • Member
  • *
  • Offline Offline
  • Posts: 7
removing end of melodeon
« on: February 07, 2011, 08:01:18 PM »

a bass button has disappeared inside my B/C button box. I am assured I can just take the end off and sort it myself. Do I really just pull out the four retaining tacks? Does this sound a recipe for disaster? Any helpful suggestions gratefully received. Thanks.
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: removing end of melodeon
« Reply #1 on: February 07, 2011, 08:08:16 PM »

No, don't remove the tacks (bellows pins) - that gives access to the reeds. To access the bass buttons and levers, remove the bass end plate - the plate under the bass strap (you should probably remove that as well). The bass plate is usually held on by 4 screws, one at each corner. Sometimes it's the bass feet that holds it on; it depends on the make of instrument. With the bass plate off, you should easily spot what's wrong.
Logged

myra

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: removing end of melodeon
« Reply #2 on: February 07, 2011, 08:43:34 PM »

Thankyou for that. All done. Just replacing the screws now  (:)
Logged

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: removing end of melodeon
« Reply #3 on: February 07, 2011, 10:18:41 PM »

You're welcome.  :|glug
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal