Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Optimising Pokerworks  (Read 3819 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Optimising Pokerworks
« on: February 13, 2011, 01:02:52 PM »

I have a Hohner 1040 single row Pokerwork in G which I'm slowly learning how to play. I'm a harmonica player, and am familiar with Hohner products. I've learnt a bit about the Pokerwork history, and the fact that it is a standard box.

I like the one row, because of the close relationship with the harmonica. Also the small size is appealing.

The design is clearly "old school", in particular the buttons disappear into the holes when pressed by clumsy beginners like me. The sound is old school as well, but I like it.

I've heard about various makers fixed up Pokerworks so that the keys work better, presumably fixing other aspects as well to make them run a whole lot better.

Could anyone give me a rundown on the common fixes done for the Pokerworks, and who does them.
Logged
Harmonica Player
Just starting with the Box

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Optimising Pokerworks
« Reply #1 on: February 13, 2011, 01:55:25 PM »

Theo's seminal work on button regulation is HERE

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Optimising Pokerworks
« Reply #2 on: February 14, 2011, 05:34:48 PM »

Depending on how air tight the instrument is, you might consider replacing the bellows gasket and refacing the pallets. Fairly easy things to do and they make a big difference in the playability of the instrument. Search in the archives for bellows gasket and pallets and you should find all you need.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Optimising Pokerworks
« Reply #3 on: February 14, 2011, 05:38:00 PM »

Hohner tuning is often "approximate",  plastic valves can be noisy, particularly on lower notes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Optimising Pokerworks
« Reply #4 on: February 15, 2011, 10:34:36 AM »

I have a Hohner 1040 single row Pokerwork in G which I'm slowly learning how to play. I'm a harmonica player, and am familiar with Hohner products. I've learnt a bit about the Pokerwork history, and the fact that it is a standard box.

I like the one row, because of the close relationship with the harmonica. Also the small size is appealing.

The design is clearly "old school", in particular the buttons disappear into the holes when pressed by clumsy beginners like me. The sound is old school as well, but I like it.

I've heard about various makers fixed up Pokerworks so that the keys work better, presumably fixing other aspects as well to make them run a whole lot better.

Could anyone give me a rundown on the common fixes done for the Pokerworks, and who does them.

Bushing the bass buttons with felt is another mod worth considering.

I've also included a photo of a Hohner 1040 showing the felt covered button stop in place.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Optimising Pokerworks
« Reply #5 on: February 15, 2011, 02:03:13 PM »

Thanks for all this. Now I just need to find someone in Australia who can do all this.

Another thing I've noticed is that the bellows leak a bit. If you expand them they can be pushed in fairly easily. Putting them close to my face I can feel some air escaping from around the middle of the bellows.

Nonetheless, it's still a nice instrument to play, even for a bumbling beginner like me. Like old guitars (I have a 1955 Gibson L50 f hole), it has a soul which new instruments don't. It's a bit like an old car, runs OK, but leaks a bit of oil and you have to thump it sometimes to get it into 2nd gear. Perhaps the instrument is best left alone to do it's thing. It's certainly good enough for me to learn on.

That said, it sounds like an experienced hand could turn it into a much better instrument. I may go down this road. Any further advice much appreciated.
Logged
Harmonica Player
Just starting with the Box

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Optimising Pokerworks
« Reply #6 on: February 15, 2011, 02:11:51 PM »

Thanks for all this. Now I just need to find someone in Australia who can do all this.

Try Malcolm Clapp
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: Optimising Pokerworks
« Reply #7 on: February 16, 2011, 10:39:10 AM »

Thanks for all this. Now I just need to find someone in Australia who can do all this.

Try Malcolm Clapp

Malcolm Clapp  of this parish

or in Petersham, Sydney; Accordions 'n Folk

or in Aldgate, Adelaide; Peter Hyde

or in Stepney, Adelaide; Ron Pearce

or in West Heidelberg, Melbourne; Captain Accordion

or in Camberwell, Melbourne; Music Junction

also if you ask around locally, you may find numerous people that may assist
Logged
Jack Murphy    beyond the black stump

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Optimising Pokerworks
« Reply #8 on: February 16, 2011, 05:51:10 PM »


Bushing the bass buttons with felt is another mod worth considering.

Martyn

Hi Martyn,

Nice job on bushing the bass buttons. I've been thinking of doing that to my Erica.

What thickness of felt did you use for this? Also, how big did you re-drill the holes to make a god fit for the bushing and button?

Thanks!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Optimising Pokerworks
« Reply #9 on: February 16, 2011, 07:34:21 PM »


Bushing the bass buttons with felt is another mod worth considering.

Martyn

Hi Martyn,

Nice job on bushing the bass buttons. I've been thinking of doing that to my Erica.

What thickness of felt did you use for this? Also, how big did you re-drill the holes to make a god fit for the bushing and button?

Thanks!


The felt I used on this the box in the photo is 1mm but I have used 1.4mm.

Rather than re-drilling the holes I use a tapered reamer with a piece of masking tape wrapped around it as a depth marker. Obviously the hole size will depend on the felt thickness and the diameter of the button. It's probably a good idea to try it out on a piece of scrap wood first though.
Something else worth doing is to cover the holes with a couple of strips of masking tape, this will help to prevent the raised piece of wood on Pokerworks and the like from splitting.

Martyn
« Last Edit: February 16, 2011, 07:35:58 PM by martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Optimising Pokerworks
« Reply #10 on: February 17, 2011, 09:16:22 AM »

Thanks for all the advice.

Malcolm Clapp has withdrawn from accordion repairs for the time being, at least according to http://jam.org.au/moxie/folkmart/9_3/clapp.shtml

I'm in Sydney, so he is the closest.

I'll be at the National Folk Festival in Canberra in April, so I can chase up some other people (hopefully) while I'm there.
Logged
Harmonica Player
Just starting with the Box

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Optimising Pokerworks
« Reply #11 on: February 18, 2011, 09:01:02 AM »

Yeah, Malcolm's your man for melodeon work around NSW. He's a legend among local players and we look forward to seeing him back in harness sometime soon. He's been pointing people in the direction of Peter Anderson in Melbourne for tuning work, and I've got PA's contact details if you need them.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal