Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Converting Hohner 1040 single row from C to D?  (Read 3352 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Converting Hohner 1040 single row from C to D?
« on: February 21, 2011, 03:45:52 AM »

I'm a harmonica player, new to the box. I'm slowly turning my harmonica skills to single row Hohners.

I have a 1040 single row Pokerwork in G, and have recently added an old Hohner 4 stop single row in C. I love the fact that these beautiful old instruments seem widely available (on eBay) and relatively cheap.

A large part of my harmonica repertoire is in D (American and Irish fiddle tunes). So I will need a box in D. I like the 1040 single row, examples in C come up fairly regularly. 1040s in D seem rare.

So. How hard/expensive (or both) is it to convert a 1040 in C to D? Is this a common task? If the job is relatively straightforward, then I could get a 1040 in C and hand it over to an expert to do the retune.
Logged
Harmonica Player
Just starting with the Box

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Converting Hohner 1040 single row from C to D?
« Reply #1 on: February 21, 2011, 10:42:57 PM »

It seems like the C to D conversion is a moot point. At least for me. Hopefully. I've just bought an old single row Hohner Melodeon in D. See attached pic.



I should have it in a week or two. My next question might be about bellows repair...
Logged
Harmonica Player
Just starting with the Box

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Converting Hohner 1040 single row from C to D?
« Reply #2 on: February 22, 2011, 01:54:03 AM »

A new set of reeds (or a new accordion already in that key  ;D) is the easiest way to convert from C to D. It's my understanding that tuning the set up by one whole step is pushing the limits of what the reeds can take.

Besides, you'd ruin a perfectly good box in C which you'll find useful sooner or later if you keep playing. 'Much more sensible to have acquired the other accordion.  :|glug

Lester has made a very nice photo essay on the topic of retaping bellows.
https://picasaweb.google.com/lester.bailey/BellowsTaping#

Unless the box came from someone who has already performed the work, the new acquisition in D looks to be in need of a total overhaul and more than just tape or gussets - general cleanup, new valves, tuning, bellows gaskets, thump strap, pallet felt/leather, tape, squaring the mating surfaces on the reed blocks, and assessment of any other issues it might have like broken springs, cracks, holes, rust, broken reeds, etc. It was a good decision to buy it, though, because if the guts are in good shape then the cost of the overhaul is comparable to purchasing a set of new Hohner reeds in D and having them installed and tuned to spec.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Converting Hohner 1040 single row from C to D?
« Reply #3 on: February 22, 2011, 01:48:38 PM »

The box supposedly plays, but will no doubt need further attention. I'll find someone in Australia who can do the work. It was very cheap. I just love the idea of having these vintage instruments, not to look at but to actually play. In the guitar world, working instruments of this era cost an arm and two legs.
Logged
Harmonica Player
Just starting with the Box

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Converting Hohner 1040 single row from C to D?
« Reply #4 on: February 22, 2011, 05:07:43 PM »

I've been up that tree before although you can find some serious deals on guitars with the internet.

I like playing Hohners partially because they are easily obtained and they just drip with classic/vintage appeal. Much less expensive than acquiring a yard full of Mercurys.  :|glug

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Converting Hohner 1040 single row from C to D?
« Reply #5 on: February 23, 2011, 10:49:55 PM »

As a positive note, if you re-tape the bellows and it is not successful, you've only lost the cost of materials and your time!  Keep an eye out on ebay for bellows, I have seen them occasionally at good prices for Hohners.  The same size bellows fit the 1140 one-row, 114 one-row and the Pokerwork/Erica/Black Dot models, although the bellows frame for the 114 type are cut away to clear the stops.  They seem to be standard length for the two-row models, but the 114 type varied in length, probably because of the varying demands for air of the different tunings (?)  It's probably best if you can find some which require gluing to your existing end frames.

I wish you joy with your latest acquisition, but as an afterthought the four-stop one rows in D are far more common in Canada than most other places.

Rob.
Logged

Dally

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • C#D Serenellini 'cloud', C#D Hohner, Max D
Re: Converting Hohner 1040 single row from C to D?
« Reply #6 on: February 26, 2011, 05:45:58 PM »

This shop in Oakland, California, sells some very interesting looking bellows.  I have never seen one of their bellows, so don't know how well they work (scroll to the bottom of the page):
http://www.smythesaccordioncenter.com/catalog.html
I do have one of their calendars and it works just fine.  ;)
Logged
“I am so clever that sometimes I don't understand a single word of what I am saying.”
― Oscar Wilde
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal