Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Bass Mechinism design  (Read 5919 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #20 on: March 04, 2011, 05:26:16 PM »

My Dallape has not seen the light of day for a while but I was prompted by this thread to take a video of the bass mechanism.
As you can see it has the mechanism to open the bass note and the root of the chord together and to select the notes for the chord from a row of reeds rather than have a set of reeds for each chord.

This instrument was made in Stradella, the place bearing the same name as the Stradella Bass now seen on most piano accordions.

The Dallape web site claims "The following is an extract from the Italian Music Encyclopaedia, under the entry "ACCORDION": "...the key figure who managed, through a series of brilliant innovations, to change the archaic accordion into the more complete and complex diatonic accordion, was born in Trentino and resided in Stradella. His name was MARIANO DALLAPE'". "


http://www.youtube.com/watch?v=_aFs5YDMvfg



Howard Mitchell

Howard,

I've been playing with how the reeds are organized. What keys does this instrument play? I've been trying to work up a diagram of the reeds for a G/C two row, eight bass that I'm designing but can't keep the chord reeds to 10. I'm starting to suspect this arrangement either uses chords that are not the standard 21/8 chords, or the instrument plays in chromatic keys. Please let us know what chords the buttons play.

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Howard Mitchell

  • Guest
Re: Bass Mechinism design
« Reply #21 on: March 06, 2011, 03:55:00 PM »


Howard,

I've been playing with how the reeds are organized. What keys does this instrument play? I've been trying to work up a diagram of the reeds for a G/C two row, eight bass that I'm designing but can't keep the chord reeds to 10. I'm starting to suspect this arrangement either uses chords that are not the standard 21/8 chords, or the instrument plays in chromatic keys. Please let us know what chords the buttons play.

Thanks,

Ed

Ed,
I forgot to mention that this is a club melodeon in C/F so it has an Eb bass and chord on the push where you would normally expect a Bb. That makes it possible to share two reeds in each row of 10.

Howard
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #22 on: March 08, 2011, 06:32:08 PM »

What diameter and kind of wire (steel, brass, galvanized, etc.) is used to make bass end mechanisms, and keyboards? I've run into a mention of soft steel wire that Theo gets from Italy but I don't have that kind of source.  I also found a reference to using coat hanger wire! Is coat hanger wire really stiff enough not to flex under the stresses of playing?

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Bass Mechinism design
« Reply #23 on: March 08, 2011, 07:39:31 PM »

Bass mechanism on a Hagström Marita from from the 50's

Materials: aluminium and brass

Works very well, simple construction and very easy to modify.
« Last Edit: March 08, 2011, 07:43:49 PM by Hasse »
Logged
Sweden, Skåne
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal