Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How much space necessary between reedblocks and bellows?  (Read 2142 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
How much space necessary between reedblocks and bellows?
« on: April 15, 2011, 01:05:43 AM »

I'm playing with a mini-melodeon design. One thing I've been searching the archives for is an understanding of how much space there should be between the inside edges of the bellows and the both the treble and bass reed blocks. Tolerances in a small melodeon are quite tight so I'd like to make the clearance as small as possible.

If you have a small instrument, would you please measure the distance between the inside of the bellows and one or the other reed block? Has anyone had problems with the clearance being too small with the result that the valves closest to the bellows are bent or damaged?

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How much space necessary between reedblocks and bellows?
« Reply #1 on: April 15, 2011, 07:26:24 AM »

Has anyone had problems with the clearance being too small with the result that the valves closest to the bellows are bent or damaged?


This is a regular problem with small format boxes.   I have had to replace valves on the left hand end of  several Oakwoods.  Castagnari get round this in the Lily (and Tommy?)  by designing a single bass/chord reedblock.

It is not usually such a problem on the treble side because, (a) the reeds and blocks are smaller, and (b) the reedblocks are mostly enclosed within the treble case.   
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How much space necessary between reedblocks and bellows?
« Reply #2 on: April 15, 2011, 09:12:59 AM »

Castagnari get round this in the Lily (and Tommy?)  by designing a single bass/chord reedblock. 
Yes - the Tommy also has a single bass/chord reedblock.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

diatosoldo

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
  • Castagnari Benny, Dino Baffetti 85LN
    • http://www.youtube.com/user/diatosoldo
Re: How much space necessary between reedblocks and bellows?
« Reply #3 on: April 15, 2011, 10:27:46 AM »

what about Castagnari Benny ?
Logged
♫ ♪  I'm french ♫ ♪
G/C Castagnari Benny
A/D Dino Baffetti 85LN
A/D Thierry Bennetoux
http://www.youtube.com/user/diatosoldo

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How much space necessary between reedblocks and bellows?
« Reply #4 on: April 15, 2011, 10:50:42 AM »

Benny has two blocks.   It's not particularly small compared with the Lily and Tommy,  though it is small for a three row.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: How much space necessary between reedblocks and bellows?
« Reply #5 on: April 15, 2011, 04:07:08 PM »

I'm playing with a mini-melodeon design. One thing I've been searching the archives for is an understanding of how much space there should be between the inside edges of the bellows and the both the treble and bass reed blocks. Tolerances in a small melodeon are quite tight so I'd like to make the clearance as small as possible.

If you have a small instrument, would you please measure the distance between the inside of the bellows and one or the other reed block? Has anyone had problems with the clearance being too small with the result that the valves closest to the bellows are bent or damaged?

Thanks

Can you lay the blocks flat against the soundboard? As in Lily, 1040, etc.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: How much space necessary between reedblocks and bellows?
« Reply #6 on: April 15, 2011, 05:36:24 PM »


This is a regular problem with small format boxes.   I have had to replace valves on the left hand end of  several Oakwoods.  Castagnari get round this in the Lily (and Tommy?)  by designing a single bass/chord reedblock.

It is not usually such a problem on the treble side because, (a) the reeds and blocks are smaller, and (b) the reedblocks are mostly enclosed within the treble case.   

I did take another look at my Hohner Pokerwork last night. The treble reed blocks are about 9mm away from the bellows at the end of the reedblock. And there's very little of the reedblock exposed above the edge of the case. If any rubbing did occur it would only hit the wood end of the treble reedblock.

The bass end is the real issue. I'm looking at designing a single reedblock, yes, but there are designs I'm coming up with that would allow me to fit quite a bit (12 button) into a very small space.

How much distance is there between the edge of the bass reedblock in a Lily or a Tommy and the inside folds of the bellows. Would someone with one of these instruments please measure?  Also, the same measurement on an Oakwood would be helpful given Theo's comments.

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How much space necessary between reedblocks and bellows?
« Reply #7 on: April 15, 2011, 05:39:07 PM »

Remember that bass reeds need the have a large volume of reed chamber in order to speak promptly.  So don't make the reedblocks too shallow.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: How much space necessary between reedblocks and bellows?
« Reply #8 on: April 15, 2011, 06:03:36 PM »

Remember that bass reeds need the have a large volume of reed chamber in order to speak promptly.  So don't make the reedblocks too shallow.

I'm planning on a good size of reed chamber for the bass end.

My main issue is not the width of the reedblock but the length of the block, if that makes sense. I have plenty of room for the reeds and the valves to open, in the current design. It's the distance from the wooden end to the bellows fold that I'm concerned about. Maybe a picture would help. I'll try to get one up today.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal