Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Slight metallic tinkling sound  (Read 4043 times)

0 Members and 1 Guest are viewing this topic.

WendyG

  • Good talker
  • **
  • Offline Offline
  • Posts: 93
  • Castagnari Clovis DG
Slight metallic tinkling sound
« on: April 20, 2011, 09:00:04 AM »

I have just replaced old curled valves on a project box, cleaned the reeds and re-waxed.  I have two reeds that are making a slight metallic tinkling sound.  I have removed said reed plates, re-cleaned, checked for any debris betweed the tongue and the reed plate and re-waxed, several times, but I still have the metallic noise.  I have also checked that the valves aren't snagging and that the reed plates are securely seated.  The sound is quite faint but annoying.  Any ideas of what to check for next would be much appreciated.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Slight metallic tinkling sound
« Reply #1 on: April 20, 2011, 09:06:48 AM »

Often that noise happens because the reed tongue is not quite central and is catching the edge of its slot.  There may be a burr, or a spot of rust on the edge of the reed tongue, or a burr on the edge of the slot. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

WendyG

  • Good talker
  • **
  • Offline Offline
  • Posts: 93
  • Castagnari Clovis DG
Re: Slight metallic tinkling sound
« Reply #2 on: April 20, 2011, 10:10:34 AM »

Thanks Theo, that's what I thought, but looking at the reeds against a bright light, I can't see anything, and the tongues look central in the plates.  I will have to get my magnifying lamp out and have another look.

Wendy
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Slight metallic tinkling sound
« Reply #3 on: April 20, 2011, 10:13:43 AM »

Don't forget to check the tip of the reed, and check again with the reed pressed down by various amounts.  Even if you can't see anything try scraping a sharp blade round the three edges of the reed tongue, and round the edges of the slot.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Slight metallic tinkling sound
« Reply #4 on: April 20, 2011, 12:42:44 PM »

Wendy, also check that the reed isn't hitting something in the reed block chamber or on the frame, possibly something totally unrelated to the reed plate.  I just about went crazy with what sounded like a metallic sound and turned out to be the tip of the reed hitting part of the frame.  And for that slot, it takes very little.  If that's what it is, you should be able to feel it by gently pushing the reed into the slot.  If it's in the slot, you'll usually get it all the time, if it's somewhere else, it may be just after a certain amount of  pressure is applied.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Slight metallic tinkling sound
« Reply #5 on: April 20, 2011, 02:13:54 PM »

In a few cases, I'm afraid, the only thing that helps is a well-aimed hammer blow on the rivet.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Slight metallic tinkling sound
« Reply #6 on: April 20, 2011, 07:02:09 PM »

Diatonix, that's one I haven't run into yet, if that's the case, is it loose to the touch?  Or just enough that it affects the sound when played?

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Slight metallic tinkling sound
« Reply #7 on: April 20, 2011, 08:44:26 PM »

The latter is more frequent. Slightly loose reeds are also notoriously hard to tune, being very unstable.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Slight metallic tinkling sound
« Reply #8 on: April 20, 2011, 09:18:26 PM »

Makes sense.  You ever see it with new reeds?

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Slight metallic tinkling sound
« Reply #9 on: April 21, 2011, 08:37:32 AM »

Makes sense.  You ever see it with new reeds?
Yes - I had trouble with the pitch stability of one of the bass reeds on the 1-row 4-stop melodeon which I made on one of the East Anglian Traditional Music Trust's melodeon making course, run by Emmanuel Pariselle.

The reeds are Binci Professional and very fine they are too, but this one particular reed caused me no end of trouble for no apparent reason. So eventually wondering whether the lack of pitch stability was due to a loose reed tongue, I gave the rivet a couple of extra whacks with a hammer. After that, a bit of retuning, and it has been fine ever since.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

WendyG

  • Good talker
  • **
  • Offline Offline
  • Posts: 93
  • Castagnari Clovis DG
Re: Slight metallic tinkling sound
« Reply #10 on: June 04, 2011, 11:12:34 AM »

Well, I have tried all of the above and have managed to sort out one of the reeds.  But I am still having problems with the other.  It is the low C/D reed (on the C row), on pull the D reed consistently makes this noise (quieter if I pull the bellows gently).  I have scrutinised said reed and have noticed that there is a slight crack on the inside, long edge of the reed frame.  I thought at first, that this was just a mark, but it isn't and it is not very deep.  Could this be the source of the noise, and does it mean that I need a replacement?

Wendy
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Slight metallic tinkling sound
« Reply #11 on: June 04, 2011, 12:49:49 PM »

Is the mark on the inside edge of the slot in which the tongue moves?   It is quite common to see marks in this are running along the length of the surface that are produced during the process of stamping out the slots.   On the highest quality reeds these are less common because a second machining process is used to give a smoother finish. 

I still am pretty sure that your problem is caused by the reed tongue making a very slight contact with the side of the slot.   I've just had exactly the same problem this morning.  The reed looked fine when near its rest position, but produced an annoying metallic sound when blown hard.  It transpired that the reeds was twisting slightly at extreme swing and kissing the side of the slot.  re-aligning the tongue away from that side cured the problem.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal