Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Modifications to HA112 2 stop in C  (Read 1450 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Modifications to HA112 2 stop in C
« on: June 24, 2011, 04:35:29 AM »

Recently I visited Jim Conway, the famous Australian harmonica player, also my neighbour. I confessed my recent melodeon afflication. After mutual commiserations he presented me with a Hohner HA112 2 stop in C which had been sitting unused in his cupboard for years.

Jim said that it didn't work, however pulling up the stops soon got it operating. The bottom half looked new, the top half badly weathered and covered with wall paint spray. Some methylated spirits and elbow grease got rid of the paint and most of the rust, a business card glued into a torn bellow fold reduced the air loss. The spoons don't sit flat and hence leak air, a new set will fix that. The instrument plays pretty well, and is a masterpiece of simplicity.

Trouble is, I already have a HA114 4 stop in C.

However, there may yet be a use for this new extra instrument. I want to play A Minor tunes, a G/C box seems the way to go. Unless...

Perhaps my little Hohner could be modified to become an A minor box. In particular:

1) The bottom button is currently E push/G pull. A far more useful combination for A minor would be an A pull and the crucial G# (almost an octave higher) on the push. Such a reed combination (a long one and a shorter one) is clearly not available of the shelf. However, perhaps I could saw two reed blocks in half, getting the required A and G# reeds, glue them together, then wax them into place? Any comments/potential traps with this?

2) Change the basses: For A minor, the current C push G pull bass would be replaced by an A pull E push. Similarly, the C/G chord could be replaced by a unisonic D bass (the Hohner HA series chords aren't much chop to my ear, a D bass note would be better). Then you would have the I, IV V bass notes for A minor. Presumably some minor woodwork would be needed to change the chord to the D bass.

Of course, to do all this I'll need to figure out how to wax reed blocks in place.

Questions:

1) Where do I buy the reeds from? Likewise the wax. Any clues/pitfalls for novice reed waxers like me?
2) I have a fair deal of experience tuning harmonica reeds, presumably accordion reeds are the same, only bigger?
2) I may well stuff it up, but given I already have a Hohner one row in C it won't be the end of the world. Still, I'd like to give this little box the best chance of coming through. Any particular pointers to help with this gratefully received.
Logged
Harmonica Player
Just starting with the Box
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal