Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner cabinet corners  (Read 1350 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Hohner cabinet corners
« on: August 06, 2011, 01:16:18 PM »

OK, so I've got these nice shiny chrome corners on order from CGM to replace the rusty old ones on a pre-pokerwork 2915 (or is it 2815? I've seen them referred to as both).  Question is, how do I get the old ones off without wrecking the woodwork or the lacquer finish? Any suggestions?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner cabinet corners
« Reply #1 on: August 06, 2011, 02:17:45 PM »

They "should" side off but if there is rust on the outside then there is probably more underneath which will make that difficult.  I've used a hacksaw to cut along the length of the corner piece then wangled the remains off with a flat blade to lever up the cut edges enough to grab them with a stout pair of pliers.  Be careful of slivers of wood breaking away from the outsde next to the metal.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner cabinet corners
« Reply #2 on: August 06, 2011, 03:00:10 PM »

Thanks Theo - I thought they should slide off but they're VERY rusty and attempts to get them moving with a fine drift have failed completely. I like the hacksawing idea - I'll give that a try, though I think I might go for a piercing saw to minimise the risk to the woodwork. I'll report back on how I get on.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner cabinet corners
« Reply #3 on: August 07, 2011, 10:14:36 AM »

Thanks again Theo - first corner successfully removed; let's hope the remaining 7 go as well!  I did have a little wood break away, as the rust was very well advanced, but it was a clean split and I was able to rebuild the corner woodwork  easily. In the end I used a very fine slitting disc in a Dremel, and it only took a minute or two.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal