Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Changing an odd keyboard layout  (Read 966 times)

0 Members and 1 Guest are viewing this topic.

Richard Shaul

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
Changing an odd keyboard layout
« on: June 30, 2017, 07:53:58 PM »

Hello,

I recently acquired 21 note G/C. It was described as a German Weltmeister, but as there is no identification anywhere, I can't guarantee this. It looks OK, and is fairly playable, but the odd thing is that the G row is 3rd button start and the C row is 2nd button start with accidentals at the low end and a high G/D at the other end. Although this is workable playing along the rows, its a bit annoying transposing from D/G and doing anything across the rows. Therefore I would like to change it to being a bit more normal, so I am hoping that Melnetters could advise me on a couple of things. I am thinking that what is needed is to remove the top G/D, move everything up one, and then add a new low G/B at number 2. To do this, is it best to take one reed out at a time and then move the next reed up and wax it in place, or take all the reeds and wax out and start again. I have never tried any wax work before, but as the box was relatively inexpensive, I'm happy to learn by making mistakes. However, if I am taking all the reeds out anyway, would it be easier to screw the reeds back in on a felt gasket, which I have done before on the Emmanuel Pariselle course. This would also make it easier to correct things if I got the reeds the wrong way round (which I also did on the EP course!)

Thanks, Richard
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Changing an odd keyboard layout
« Reply #1 on: June 30, 2017, 08:39:02 PM »

Take all the reeds out first. Lay them out in order on a tray of some sort.  Clean them so they are free of old wax and while you have them out take the opportunity to replace the valves.  Carefully clean the reed block to remove all old wax.  When re-waxing start off by tacking the reeds in place with a couple of spots of wax,  then check they are all in the right place, finally complete the waxing.  Do the accidentals at the same time.  When you are done you might find the newly waxed reed sound so much better you will want to do the other row as well!

I'd not recommend changing to screw fixing.  Gasket material doesn't stick too well to wood that has been waxed, and the blocks are likely to be softwood that does not give much for the screws to bite into.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal