Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: unstable reed  (Read 1971 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
unstable reed
« on: January 02, 2012, 12:28:13 AM »

One of the high G reeds on my G/C Casta seems unstable.  It's the high G on the G row and it just seem to behave erratically for no apparent reason.  The pitch seems to wander around. Only one of the two reeds does this.  The other one behaves normally.  These are good quality AM Antonelli reeds.  Is there such a thing as a 'bad' reed that just wont' function normally?
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: unstable reed
« Reply #1 on: January 02, 2012, 02:17:17 AM »

One of the high G reeds on my G/C Casta seems unstable.  It's the high G on the G row and it just seem to behave erratically for no apparent reason.  The pitch seems to wander around. Only one of the two reeds does this.  The other one behaves normally.  These are good quality AM Antonelli reeds.  Is there such a thing as a 'bad' reed that just wont' function normally?

Could be the valve on the inside of the plate is not opening fully (maybe rubbing the wall of the reed chamber), or reed tongue fouled by a hair or bit of fluff, or reed slightly askew in the plate  ???
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: unstable reed
« Reply #2 on: January 02, 2012, 09:03:12 AM »

One of the high G reeds on my G/C Casta seems unstable.  It's the high G on the G row and it just seem to behave erratically for no apparent reason.  The pitch seems to wander around. Only one of the two reeds does this.  The other one behaves normally.  These are good quality AM Antonelli reeds.  Is there such a thing as a 'bad' reed that just wont' function normally?

Could be the valve on the inside of the plate is not opening fully (maybe rubbing the wall of the reed chamber), or reed tongue fouled by a hair or bit of fluff, or reed slightly askew in the plate  ???
Yes, possible reasons, although probably for these highest reeds there are no valves anyway.
It can be hard to get the high reeds to behave properly - they are so sensitive to the minutest adjustment in tuning and setting of the gap.

Does the pitch variation your problematic reed change with differing bellows pressure? If so, it is possible that the gap setting isn't quite right. Variable pitch can often (but not always!) indicate that the gap is too small. Have a careful look to see if it is the same as it's well-behaved partner. You could try easing the reed tongue upwards a little using a very thin shim - go very carefully, a tiny, tiny amount at a time to see if that improves the pitch stability. Adjusting the gap will also affect the response of the reed and probably its tuning too, so be prepared to do some very exacting work to get the pitch, response and stability just right.

Quote
Is there such a thing as a 'bad' reed that just wont' function normally?
I think this sometimes happens though it's very rare. I once had a Binci reed which refused to stay in tune; I tried all sorts of things - adjusted the gap, replaced the valve, checked the seating of the reed plate (screwed on leather in this instance), etc. but to no avail. In desperation I wondered whether the reed tongue was riveted firmly enough to the reed plate. It didn't appear to be loose but everything else had failed to remedy the problem. I took the reed out of the box and supported it on a steel block and gave the rivet head a couple of extra whacks with a hammer. Bingo! I retuned the reed and it has behaved itself ever since.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: unstable reed
« Reply #3 on: January 02, 2012, 09:19:23 AM »

But the most likely by far is some dirt in the reed.  Eliminate that possibility first.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: unstable reed
« Reply #4 on: January 02, 2012, 03:52:37 PM »

Thanks for the replies.  I have inspected the reed and gap and valve closely and cannot find anything simple. No foreign material and the valve looks normal and does not appear to be impinging on anything but I guess it could be.  I have not replaced the valve yet.  ( or hammered the rivet ;D)
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: unstable reed
« Reply #5 on: January 02, 2012, 04:02:30 PM »

Have you inspected under a reasonable degree of magnification? I've had reeds that refused to speak at all, and to the naked eye - or even under a handheld glass - there appeared to be no obvious problem. But under 12x magnification a few specks of crud were revealed and removed - hey presto, a beautifully clear-sounding reed.  Mind you, in this case the reeds were out of the box and I was able to inspect the reed-plate unencumbered by bodywork......
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: unstable reed
« Reply #6 on: January 02, 2012, 04:26:25 PM »

Another possibility is that the reed plate is not held tightly by the wax allowing the reed plate to vibrate.  This can be quite hard to detect, best way I have found is to press on the reedplate with a small screwdriver while sounding the reed, then taking the pressure off while the reed continues to sound.  The sound should not change.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: unstable reed
« Reply #7 on: January 02, 2012, 05:19:13 PM »

Another possibility is that the reed plate is not held tightly by the wax allowing the reed plate to vibrate.  This can be quite hard to detect, best way I have found is to press on the reedplate with a small screwdriver while sounding the reed, then taking the pressure off while the reed continues to sound.  The sound should not change.

Another good tip.  Thanks.   It is mind boggling how many different ways these bits of steel can misbehave.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal