Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: toy melodeon: adjusting wires from bass buttons to valve covers?  (Read 2080 times)

0 Members and 1 Guest are viewing this topic.

jventola

  • Member
  • *
  • Offline Offline
  • Posts: 14

As you see, I do not even know the terminology. The problem is that two of the bass buttons have descended into their holes.  And sometimes a chord  won't stop playing.  The wood piece that covers the reed hole is fine-- and the the springs that lift them are fine.  But the wire connectors from the buttons to the lever that lifts that wood piece are munged from my repeated adjustments.

The problem is that I do not know what I am aiming at, other than I want the buttons back up, the reed holes properly shut, and the wires to articulate between the levers and the buttons.  But what are the right steps to achieve this? By now the wires have some crimps, etc. from my fumbling.

Is there a procedure for getting the tensions right, etc. Thanks.

http://dl.dropbox.com/u/286921/Shared/IMG_00000257.jpg
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #1 on: April 21, 2012, 08:31:25 PM »

The problem appears to be that the loop on the bottom of he wires from the buttons has slipped side ways. I would guess that if you lift the button up so as to reseat the loop correctly you could crimp the loop up to prevent it slipping again.

Hope that makes sense.

jventola

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #2 on: April 21, 2012, 10:26:22 PM »

That does make sense. Thanks.

I love this little toy melodeon. Getting it playable again is a good thing. (But your penguin pokerwork looks awesome.)
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #3 on: April 22, 2012, 07:45:23 AM »

I have the £10 plastic version and love it too - or would if the damn thing wasn`t so leaky in the bellows - do the wooden ones have the same gusset and join leaks and extreme air hungriness as a result ?
Logged
Q: How do you cure MAD?
A: Buy more Boxes

chappie86

  • Folker
  • Good talker
  • **
  • Offline Offline
  • Posts: 65
  • Discovering Melodeons
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #4 on: April 22, 2012, 07:50:01 AM »

I have a plastic version to and love it. It is partly to blame for getting me hooked on melodeons. ::)

Hope you get everything sorted.

Chappie
Logged

jventola

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #5 on: April 22, 2012, 10:10:24 PM »

I have the £10 plastic version and love it too - or would if the damn thing wasn`t so leaky in the bellows - do the wooden ones have the same gusset and join leaks and extreme air hungriness as a result ?

I have heard that some buy two of these and then join the bellows to get much more air to play with.  For me, I am learning to play with a light touch, which might stand in good stead if I ever move up to a real one.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #6 on: April 22, 2012, 11:15:23 PM »

You have a real one.  :||:
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: toy melodeon: adjusting wires from bass buttons to valve covers?
« Reply #7 on: April 23, 2012, 08:06:11 AM »

Yup, unlike the Junior Bontempi PAs of the 70s with their plastic reeds, folded paper bellows  (no tape or gussets) and no reed valves, the Toy melodeon is a much a real one as a Castagnari Mignon or Bafetti Mini Piccolo..  it has a proper reed block, discrete reeds with valves which are waxed in and bellows which have both gussets and tape......
IF only somone made replacement non leaky bellows and there was an easy way to stick them to the plastic frame (PVA doesn`t adhere to the plastic very well) it`d be quite a playable little box, a kinda low grade Castagnari Mignon for the masses  ;D :|||:
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal