Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: One Row German Olewo Melodeon - How do I access the bass pallets for repair?  (Read 3095 times)

0 Members and 1 Guest are viewing this topic.

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8

I am trying to fix up my old melodeon and can't figure out how to access the bass pallets - It seems as though the housing is nailed and/or glued to the soundboard. Any tips on how to gain access as one of the pallets has come loose, and intermittently leaks air, and both need the leather seals replaced? Do you think that if I remove the reed blocks there will be a sufficiently large aperture(s) to undertake the necessary repairs or is my only option to carefully prise the base housing away from the soundboard?

Many thanks

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Please post o photo or two so we can see what you are describing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso

Usually, the bass pallets on a standard button bass melodeon (not a spoon or button/growlbox system) are accessed by removing the panel behind the bass strap (the end of the melodeon) , it`s usually held on either by screws at the edges, screws through the feet or the feet unscrew themelves ..

if its a Growlbox rear end (small oblong box on the end of the melodeon with the buttons and bass strap on) which has buttons instead of spoons , the growlbox will need to be removed to access the leathers, there should be screws in the rear end

Top pic is the rear mech system - below for the Growlbox system
« Last Edit: October 26, 2012, 04:58:51 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8
Logged

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8



Thanks for the reply. The housing containing the pallets and mechanism is attached to the soundboard with nails (and I guess glue). There are no screws anywhere as far as I can see.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso

The hohner ones are screwed on . I get the feeling that this box wasn`t designed to be serviced to such a degree . you can pep up the leather facings of these kind of pallets by roughing them up with a file through the hole near the button to fluff up the leather where it`s compressed  - just a thought.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place



Thanks for the reply. The housing containing the pallets and mechanism is attached to the soundboard with nails (and I guess glue). There are no screws anywhere as far as I can see.

There may be other nails or screws under the reed plates.   You have to remove the reed plates to see them.   If you pull out the nails to get access to the pallets you can always put them back on with screws, and you will need some fresh gasket material too, to make an airtight seal between the growl box and the end plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8

Think that is probably the best plan - Remove reed blocks, try and extract nails, CAREFULLY prise housing from the soundboard. I will definately be reatatching with screws. Will let you know how I get on. Many thanks.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods

Note that Theo was recommending removing the reed plates, not the reed blocks. The plates are the metal things, which should be waxed in. The blocks are the wooden surround (although perhaps pans rather than blocks as they are flat mounted) which look glued in.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Edwab78

  • Member
  • *
  • Offline Offline
  • Posts: 8

Well I managed to remove the growlbox. In the end I had to shear the heads from the securing nails and pull them through - thankfully I managed to do this without causing any damage. The pallets have now been repaired and refaced, I have resealed the growlbox with neoprene and screwed it back together to allow future repairs to be easily undertaken. Am very pleased with the result (even if I do say so myself!).

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions

Well done. There's so much good instruction on here.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal