Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: .  (Read 7672 times)

0 Members and 1 Guest are viewing this topic.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Removing celluloid
« Reply #20 on: December 04, 2012, 04:32:11 PM »

Probably not because it would be extremely difficult, if possible at all, to apply it around corners.

If it's 1940s or earlier then I'm pretty sure it can't be any modern celluloid substitute, most of which are susceptible to solvents anyway, and if acetone doesn't do anything then it's probably bakelite.
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Removing celluloid
« Reply #21 on: December 04, 2012, 04:46:03 PM »

It wouldn't have been bakelite if it started bubbling up and melting in a pan of boiling water (a pan which quite possibly would have a bakelite handle because of its heat resistant properties).

Covering a melodeon with bakelite is incredibly unlikely. Apart from the difficulty, it's the wrong type of material, too hard and brittle.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Removing celluloid
« Reply #22 on: December 04, 2012, 04:55:51 PM »

I took "bubbled and started to lift" as the adhesive underneath it giving up, nothing about it melting.

If it's 1940s or earlier, it's not celluloid and is resistant to acetone then I can't think what else it might be.

The sure way to tell if it's bakelite or a similar phenolic is to cut or sand it and see if it has a noticeable carbolic-y odour.
« Last Edit: December 04, 2012, 05:09:17 PM by Andy Simpson »
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Removing celluloid
« Reply #23 on: December 04, 2012, 05:38:16 PM »

Hmm, the plot thickens, bakelite is stiff and brittle. When you say "bubbled" do you mean that it started forming bubbles on it like melting cheese?. If it did that then it's probably not bakelite either.

I don't know what other plastics were in common use in the 1940s and before so if it's not celluloid and it's not bakelite then what is it? :-\
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Removing celluloid
« Reply #24 on: December 06, 2012, 05:12:47 PM »

Lucite (or a version of it) was available in the 40's it was used in aircraft windows during WW2. That might have been what it was.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal