Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Securing the Bellows Strap  (Read 1446 times)

0 Members and 1 Guest are viewing this topic.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Securing the Bellows Strap
« on: December 15, 2012, 01:50:44 PM »

Just fitting some of Charlie's bellows straps to a pokerwork.

How do people "secure" the nut which holds the strap via the bolt that goes through the case?

I can that see a few off/on's will cause the nut to slowly loosen.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Securing the Bellows Strap
« Reply #1 on: December 15, 2012, 02:06:38 PM »

Just fitting some of Charlie's bellows straps to a pokerwork.

How do people "secure" the nut which holds the strap via the bolt that goes through the case?

I can that see a few off/on's will cause the nut to slowly loosen.

Assuming you mean these:

http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellow_Straps.html#7

Conceptually, if you have drilled the hole the correct size, the step on the screw should allow the casework to stop the screw on the top face allowing you to tighten the nut inside. In practice, however hard I have tried, that doesn't work as the casework on a pokerwork is too soft. So what I do is spend some time making sure I am happy with the tightness of the nut (ie no air leak and the strap tight enough to stay where it is put, then a blob of super glue on the nut!

Mind you I now fit these which are altogether better
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellow_Straps.html#33

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Securing the Bellows Strap
« Reply #2 on: December 15, 2012, 02:18:51 PM »

thanks Lester, superglue it is.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Securing the Bellows Strap
« Reply #3 on: December 15, 2012, 03:10:13 PM »

I can't help feeling Loctite might be a better solution.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Securing the Bellows Strap
« Reply #4 on: December 15, 2012, 03:13:12 PM »

I can't help feeling Loctite might be a better solution.

If you have some, I find superglue works well in the situations and is easily seperatable if need be!

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Securing the Bellows Strap
« Reply #5 on: December 15, 2012, 04:07:20 PM »

Most if not all the Loctite variants are in fact types of "superglue".  An application like this doesn't make great demands on it, so anything should work.  Best if you can get it onto the working threads too.

Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal