Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Maestro bellows dented  (Read 1892 times)

0 Members and 1 Guest are viewing this topic.

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Maestro bellows dented
« on: May 24, 2013, 09:51:25 PM »

I've got a Maestro D/G with damaged bellows (went in for a reed replacement and came back with badly dented bellows - too late to complain to the repairer) that I need to sort.

The box is really unplayable now - expanding the bellows just causes them to 'suck in' across the weakened folds.

Any pointers on how to either reinforce the bellows or whether they need replacing would be very welcome!

Many thanks,

JJ
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Maestro bellows dented
« Reply #1 on: May 25, 2013, 06:18:57 AM »

Any chance of a photo JJ? Preferably inside and out.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Maestro bellows dented
« Reply #2 on: May 28, 2013, 03:32:02 PM »

i have no experience of fixing bellows. but would have thought it quite possible to strengthen airtight bellows.    the weakest part of the structure is in the middle of the flat sides. ( ie  furthest away from the corners).
  a narrow strip of card could be folded to match the bellows folds,and then glued on the inside of bellow to stiffen it.  retaping the bellow folds with thicker tape might also add strength.
     i offer my comments as no one else as made any suggestion.      best of luck brian.
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Maestro bellows dented
« Reply #3 on: May 28, 2013, 07:38:02 PM »

i have no experience of fixing bellows. but would have thought it quite possible to strengthen airtight bellows.    the weakest part of the structure is in the middle of the flat sides. ( ie  furthest away from the corners).
  a narrow strip of card could be folded to match the bellows folds,and then glued on the inside of bellow to stiffen it.  retaping the bellow folds with thicker tape might also add strength.
     i offer my comments as no one else as made any suggestion.      best of luck brian.

Yep I'm surprised Brian, no ones replying including JJ himself.
What you say is correct, however, the reinforcing stuff needs to be very thin otherwise  the bellows straps would probabably need altering and when closed probably look horrible.
Without photo's it's impossible to tell how damaged it is.
Possibly a strip of plastic ( credit card, or thinner) may do the trick.  But without a picture it's impossible to say. :-[
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Re: Maestro bellows dented
« Reply #4 on: May 28, 2013, 11:41:42 PM »

Hi folks,

Sorry for the lack of reply, I'm away in foreign parts at the moment - back in a couple of weeks.

I'll post photos as soon as I'm back.

The suggestions of some sort of stiffening medium sounds good - I wonder what sort of adhesive to use, more thought required.

Thanks for your suggestions so far, I'm feeling a little more positive about being able to get the thing back on the road again.

Cheers,

JJ
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Maestro bellows dented
« Reply #5 on: May 28, 2013, 11:46:51 PM »

Yes you can sometimes effect a long lasting repair by gluing strips of card, folded into a vee,  inside the bellows folds.  The card needs to be very good quality and quite stiff, some thickening of the bellows is inevitable and if the damage extends across many folds the repair may thicken the bellows enough that the bellows don't close fully and the bellows straps won't fasten. 

For glue I would recommend pva, and you need to work out a clamping method that will not end up with the folds glued into a solid block! Layers of polythene between the folds can work well.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal