Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Bellows Pin Remover  (Read 7595 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bellows Pin Remover
« Reply #20 on: July 04, 2013, 12:59:34 PM »

I have seen a tool that looks like a screwdriver with a small claw on the end. I don't know what it is called but it worked very well and didn't leave scratches.
That is a tack lifter. The one sold by B&Q comes on a card which is handy for putting under the tool to protect the accordion surface.

No! you will damage the casework eventually and probably sooner than that.
Totally agree with Lester. Don't use these things! Reasons already given earlier in this thread. You need a tool such as pliers or end cutters which will allow you to give a straight upwards pull. Also use cloth or chamois leather to protect the casework.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Bellows Pin Remover
« Reply #21 on: July 04, 2013, 01:05:04 PM »

Disagree with both of you. Have you tried one at all? The variable radius on the end of the tool gives a lift at right angles to the surface.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows Pin Remover
« Reply #22 on: July 04, 2013, 02:27:00 PM »

Disagree with both of you. Have you tried one at all? The variable radius on the end of the tool gives a lift at right angles to the surface.

Feel free to disagree, but the pliers method puts no pressure on the casework at all whereas the tack lifter does and therefore can/may damage the casework.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Bellows Pin Remover
« Reply #23 on: July 04, 2013, 03:06:10 PM »

Disagree with both of you. Have you tried one at all? The variable radius on the end of the tool gives a lift at right angles to the surface.

Feel free to disagree, but the pliers method puts no pressure on the casework at all whereas the tack lifter does and therefore can/may damage the casework.

Absolutely right. Modified/blunt end-cutters are definitely the way to go.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Bellows Pin Remover
« Reply #24 on: July 06, 2013, 09:10:55 AM »

I have end cutters with the jaws dulled by a file, and a scrap of leather like Steve uses. They work nicely for <$3. Formerly, I used a nail clipper with similarly modified jaws. Handy for the pocket but difficult to manipulate.

I'll second that recommendation of Harbor Freight for anyone who lives in the US.... well, for some things, anyway. We actually have a brick and mortar HF in our town. It's filled with diverse stuff of Chinese origin that doesn't have to be expensive to be functional. Like nylon rope, buckets, trash bags, primer, and hardware.
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal