Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Restoring a 2815 Presswood Koch  (Read 2937 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Restoring a 2815 Presswood Koch
« on: July 07, 2013, 04:53:37 PM »

I have a Koch badged Presswood 2815 (long frames, no bellows pins) and was wondering how to restore the wood as the varnish is chipped and there`s minor wood damage (corner scuffs etc ) if this was flat wood, it`d be an easy case of sanding and re-finishing with varnish or Oil but as it`s got the presswood finish , not an option :(  ..... the Fingerboard has cracked between the buttons, thanfully with no pieces missing, I`m glueing this back into shape but this will need the most work regarding tidying up ..

Hardware wise, of course it`s the same as a Pokerwork (Mechs, grille, pallets, reedblocks etc) .  Zinc plates all round, H in the Treble, T in the bass  .. How old are these things? do they pre-date the 2915s (narrow frames & Bellows pins) or did they run at the same time ?

Thanks for any advice ..... Pic of the Box

Logged
Q: How do you cure MAD?
A: Buy more Boxes

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Restoring a 2815 Presswood Koch
« Reply #1 on: July 08, 2013, 09:35:37 PM »

Cannot see from your picture just how bad the damage is.
If it is any use to you, I have a pretty tidy treble end casing.
I also have the bass end, a better colour match than yours, but with damage to the outer edge on the back. The other three sides air O.K. suppose you cold always plane a radius on that edge, varnish it and swear blind it had been done to make it kinder on the wrist.
If interested let me know.
By the way, the "Original Hohner" KOCH is not a 2815 ;)
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Restoring a 2815 Presswood Koch
« Reply #2 on: July 09, 2013, 08:05:28 AM »

Damage isn`t bad, it`s more tatty varnish than anything else - the bass end matches the treble better than it looks in the pic, the treble end has faded more though  . Thanks ..

As for the 2815 thing, we tend to call the thin frame bellows pin boxes like the pokerwork, late 30s Pre-Erica doublerays etc 2915s so thought quite a while ago that logically the "Thru-screw" fitted wide bellow frame "Original Hohner" Kochs like this Must be what a 2815 is . Ah well .. when was Hohner ever logical ;-)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Any Ideas on this
« Reply #3 on: August 02, 2013, 12:21:24 PM »

Any Ideas on this ? ... what have others done to tidy up the finish - varnish over the top ? .. also can the very squared off bellows corners be had ? . I could do with an old bass button to match the others too

I`ve waxed and valved both ends now and its sounding superb, apart from doing the treble end button thing (shame Charlie doesn`t sell made up wood for that), replacing the bass and bellows straps and doing cosmetics, it`s  done ...... the box is a lovely sounding player with the bright sound I love  . it`d be shame not to tidy up the wood .
Logged
Q: How do you cure MAD?
A: Buy more Boxes

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Restoring a 2815 Presswood Koch
« Reply #4 on: August 02, 2013, 03:10:26 PM »

Adam.. is it D/G?
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Restoring a 2815 Presswood Koch
« Reply #5 on: August 02, 2013, 03:21:02 PM »

Oh..and the bass button; use a newer one but soak it in strong tea until it's comparable to the existing ones... worked for me... ;) could take a week.....
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Restoring a 2815 Presswood Koch
« Reply #6 on: August 02, 2013, 05:42:59 PM »

It`s a C/F with accidentals (and sounds absolutely Glorious) though the reedblocks look standard pokerwork / Erica to me so it could be any key you wanted with a donor box , Button wise I`ll probably change Four so all the ones for that Row match ..

What amazed me was that the grille wasn`t Rusted (I changed the cloth) ,  I`m getting new bellows and bass straps and four bellows corners which are missing .

As far as I can tell this is the oldest of the 2915 type boxes hohner made - Probably just after they bought Koch and before the design migrated into the bellows pin system we know now . they did the two screw system well as they`re machine bolts which screw into metal brackets to hold the ends on rather than wood screws into wood like the various Klingenthal boxes.
« Last Edit: August 02, 2013, 05:44:36 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Restoring a 2815 Presswood Koch
« Reply #7 on: August 05, 2013, 12:14:02 PM »

Real natural varnishes can be overcoated, though you need to feather the edges of the damaged areas and sand to key in.  Modern "synthetic" varnishes often cannot be as effectively as any wear is likely to be the precursor of the whole original coating flaking off.  The other option is probably higher risk as it would involve competely strpping the original finish with a chemical stripper and thoroughly cleaning the wood, maybe even bleaching it, to get a uniform colour again.

I guess the main question is what type of varnish was originally used and what do you intend to use to patch in?  I would guess from the age it would have a natural varnish finish, possibly simply a tung oil type, which dries completely to a traditional shiny finish, but the suppliers of Le Tonkinois varnish offer an additive to give a satin finish.  http://www.letonkinoisvarnish.co.uk/VarPrices.html

The best varnish I know is the splatter around the cooker after a stirfry!

Rob.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Restoring a 2815 Presswood Koch
« Reply #8 on: August 05, 2013, 01:59:32 PM »

I`m sure its a Varnish Rob and it`s bound to be natural (a 20s/30s box) , I don`t like the idea of chemical stripping it but sandinf in the damaged bits and over-varnishing it sounds doable - I`ve got Finishing oil which is great on bare wood but I`d not like to try it over old. varnish (anyone tried this ?) ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal