Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Custom made springs  (Read 1038 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Custom made springs
« on: November 27, 2013, 10:13:17 AM »

I need to make some custom sized springs for an ancient keyboard.
What gauge of spring wire (piano?) is best and where can I get some in the UK?
I've seen the vid from the Pigini factory where they make springs... any tips for making your own?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom made springs
« Reply #1 on: November 27, 2013, 10:28:50 AM »

It's not too difficult to make your own springs, but it is even easier to buy ready made ones that are close to what you need and then bend and trim the legs to what you need.
Spring gauges vary between .4mm up to .8mm. Sometimes different gauges are used for different rows on the same instrument. The first step is to measure the spring wire used in your instrument or a similar one. If you can't do that then you will need to do some experimenting.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Custom made springs
« Reply #2 on: November 27, 2013, 10:48:20 AM »

Thanks Theo. And I guess the springs come from CGM? or do you source yours from somewhere else?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Custom made springs
« Reply #3 on: November 27, 2013, 10:53:09 AM »

CGM is your best source
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal