Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Plastic valves/box position  (Read 2449 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Plastic valves/box position
« on: January 27, 2014, 04:50:52 PM »

I use an accordion stand to hold the box while I practice, so I can stand while playing.  Taking the accordion out of the stand is a very minor inconvenience...really minor, but there it is, and I was wondering if it was OK to leave the box in a horizontal position when it's not being played, instead of resting on its feet like you're supposed to, to avoid valve curl.  The box in question is a new Castagnari with those valves made out of Velveeta or whatever it's called, and I was curious if those plastic valves would be OK, indeed if the whole sit-it-on-its-feet-while-not-playing rigamarole weren't just a historical curiosity now, with plastic valves anyway.
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Plastic valves/box position
« Reply #1 on: January 29, 2014, 10:15:33 PM »

Anybody?  This thing on? 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Plastic valves/box position
« Reply #2 on: January 29, 2014, 10:24:13 PM »

Never really understand this valve curl prevention by placing your box on its feet thing!

The thing is if you put your box on its feet the treble valves will hang down which is probably good, but the bass valves could tend to curl as they are mounted at their lower end in this position, additionally the bass valves are longer and heavier. So in my head if there was a problem from valve curl placing your box on its feet would probably be the worst case position.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Plastic valves/box position
« Reply #3 on: January 29, 2014, 10:24:44 PM »

The advice for concertinas is to store them in the playing position.

For plastic valved boxes I can't see it making much difference, but the valves will be on their sides in a stand so again I can't see them drooping if left in the stand.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Plastic valves/box position
« Reply #4 on: January 29, 2014, 11:00:50 PM »

I store all my kit at 37-46o off horizontal; cover all the angles :o
Logged
  _       _    _      _ 

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Plastic valves/box position
« Reply #5 on: January 29, 2014, 11:34:00 PM »

Never really understand this valve curl prevention by placing your box on its feet thing!

The thing is if you put your box on its feet the treble valves will hang down which is probably good, but the bass valves could tend to curl as they are mounted at their lower end in this position, additionally the bass valves are longer and heavier. So in my head if there was a problem from valve curl placing your box on its feet would probably be the worst case position.

I never understood that, either, given that the reed blocks do oppose one another. I think time, moisture, and air leakage at seals like pallets and gaskets are bigger problems than valve curl due to storage position, if that even happens. Besides, by the time the valves start to curl, it's probably time to take the box to the doctor for a tuning checkup, anyway.

A neurotic, safety conscious boxist will no doubt store his upright but change its orientation by a quarter-turn each day. Works with fine wine, why not melodeons?  :|glug

Where'd you get the Freddy emoticon? I want one!  >:E

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Plastic valves/box position
« Reply #6 on: January 30, 2014, 12:24:12 AM »



Where'd you get the Freddy emoticon? I want one!  >:E
[/quote]

Yeah I want one too!
Anyway, it's an interesting point. At Sidmouth last year I was invited to play with Exeter Morris men , a very friendly bunch. One of the musicians said, no don't put the bellows straps on, better to leave it open when not playing.
 I notice that my Albrecht has no bellows straps at all. Interesting concept, any comments?  :-*
 
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Plastic valves/box position
« Reply #7 on: January 30, 2014, 12:26:46 AM »

Never believe a Morris man!  >:E
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Plastic valves/box position
« Reply #8 on: January 30, 2014, 12:27:04 AM »

 

That little bugger scares me more than all the curled valves I have ever seen!

Yep me too, so where can we get one?
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Plastic valves/box position
« Reply #9 on: January 30, 2014, 12:28:41 AM »

Never believe a Morris man!  >:E

Wot! Not even from York?  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Plastic valves/box position
« Reply #10 on: January 30, 2014, 02:13:40 AM »

My Pokerwork is still sporting the original (Velveeta! ;D) valves. It was made probably 50 yrs ago, and I have had it for 20 years. Except for a couple that have shed and needed to be re-stuck, they are still flat to the plates. As far as basses, I think boosters are always a great idea on the big and medium reeds.
   It is my theory that leather valves are less likely to curl if the box is played daily, rather than to stand idle for long period of time (weeks, months) in any position, upright or not.
« Last Edit: January 30, 2014, 02:17:41 AM by forrest »
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Plastic valves/box position
« Reply #11 on: January 30, 2014, 04:47:46 PM »

Ha, the advice to slowly rotate the box is great.  Will pass that along, see what kind of looks I get. 

Get your emoticons here:  Deep House Page Smilies.  Preformatted for BBCode no less.  I did a lot of looking around for a page with smilies all laid out on one page, preformatted.  Really important stuff, you know.  Critical to being part of online communities.     websmileys is another good one. 
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Plastic valves/box position
« Reply #12 on: January 30, 2014, 06:01:00 PM »

Where'd you get the Freddy emoticon? I want one!  >:E
Right click, select "copy image location" (or whatever your browser says for that) and paste:
http://deephousepage.com/smilies/fkr.gif  = 
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal