Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: internal mikes  (Read 4063 times)

0 Members and 1 Guest are viewing this topic.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
internal mikes
« on: February 27, 2014, 02:37:36 PM »

For a project melodeon microphone I purchased some accordion mikes on fleabay, he has some more to sell so look at his listing.http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=171247757181 You will see that the mikes are fitted bellowsides on the picture. Years ago I made an internal mike out of an old  microvox that had got trodden on when clearing the stage. As I did not want to drill too many holes In the instrument I mounted the bass end mike inside on the reed block but as soon as the air pressure built up with moving the bellows it would not work.

I know that a diaphragm was needed to work a mike back in the last century but have these modern mikes overcome the air pressure problems? I shall make up a compact mike holder that I can clip on the grill of my box, then it can be used on other boxes so I should not have that problem. Just asking out of curiosity.

For the record I did jerry rig the mikes onto the grill with some bluetack and they seemed to work quite well. There is no power needed to run them and the mikes have 'BeStar  BPT-40XLF' printed on them, also they came from Poland.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: internal mikes
« Reply #1 on: February 27, 2014, 04:03:54 PM »

A microphone basically has to have a moving part since it is converting a physical wave to an electrical impulse.  Something or other needs to react to the sound wave or other vibrations whether it's in an electret, ribbon, carbon or dynamic (the ones that really have what would be thought of as having a membrane) or more exotic silicon or liquid microphones.

I think it's easy to see how a dynamic or electret mic might be overwhelmed by the sound level inside a melodeon. It's an interesting thought that a dynamic mic might be influenced by rapidly changing air pressures, I could easily see that being true, but it'll need someone else who knows more to confirm that.

For those microphones on ebay. Looking at them I have a strong suspicion that they are crystal (piezoelectric) microphones. There is no power supply as would be needed by electret or carbon microphones (I assume that since it's a jack connector that there is no phantom power), though that could also mean they are dynamic mics, but I don't think that they look like it.

I seem to remember that crystal mics were popularly fitted (on the outside, treble end) by Cajun musicians.

Crystal mics I've found give a tinny sound and a low signal that has to be really boosted. Though maybe I didn't know how to deal with them properly :-D

jojaba55

  • Guest
Re: internal mikes
« Reply #2 on: February 27, 2014, 04:18:31 PM »

Being also a bluesharp (harmonica) player I can confirm that a dynamic mic is influenced by rapidly changing air pressures. Thats the art to make your harmonica sound "dirty" playing blues.
All you do is cupping your mic while playing (making it as airtight as possible and building up the pressure in the cupped hands) to change the sound of your (dynamic) harmonica mic.
Hope that this is the replay your where asking for.

John
Logged

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: internal mikes
« Reply #3 on: February 27, 2014, 04:37:36 PM »

These are piezo-electric transducers.  See http://www.bestartech.com/41.5mm-diameter-piezo-indicator-12vdc-100db-12ma-self-drive-p-22-l-en.html
They are very high impedance so I expect the volume control that comes with them is greater than 1Mohms and it needs to be connected to a very high input impedance amplifier. Many guitar amps will be OK.  However these devices have resonant frequency around 4KHz (they're intended as sounders) so the the sound you get will probable require shaping. Note that you can buy these for under a pound each.  I have used similar devices mounted directly on string instruments but with an FET buffer up close but I've never had too much success with them otherwise.

Howard
Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: internal mikes
« Reply #4 on: February 27, 2014, 04:54:08 PM »

Yep. You are right about needing a boost. I put them through my digital delay pedal which I think has a small boost/preamp in the circuitry and the difference in volume was quite dramatic.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

jojaba55

  • Guest
Re: internal mikes
« Reply #5 on: February 27, 2014, 05:30:33 PM »

In case of adjusting the in or output impendance, consider buying a pre amp like this one and you will be able to plug in with every amplifier availible.
http://www.thomann.de/gb/art_tube_mp.htm?sid=cc2cef5a721725087beaccf45e93f7d8
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal mikes
« Reply #6 on: February 27, 2014, 06:51:48 PM »

These are piezo-electric transducers.  See http://www.bestartech.com/41.5mm-diameter-piezo-indicator-12vdc-100db-12ma-self-drive-p-22-l-en.html

I thought they looked familiar, and indeed my first thought was "piezo sounders!"

Putting mics inside the bellows is a complete lottery. I had a cheap internal mic inside my Pokerwork for many years. It worked really well, then one of the tiny wires broke and no replacement sounded any better than utterly abysmal, and I switched to external mics.

Those little piezos might just work brilliantly on some box, but I'd buy them direct for £1 and try them - cheap enough to throw away if they don't work.
Yes, a guitar amp or FET input preamp box is needed. A normal mixer input will be far too low impedance.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: internal mikes
« Reply #7 on: February 27, 2014, 10:41:23 PM »

Standard practice amongst Cajun and Zydeco musicians is to mount an R65 dynamic (SM58 capsule) complete with transformer inside the bellows on top of the treble blocks. Use a guitar end-pin jack for the output and smear some glue around the terminals to make it airtight.
Sounds wicked. Some phasing occurs depending on bellows extension but that in itself is a useful effect.
All my boxes have this.
Best run through an EQ pedal.

Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: internal mikes
« Reply #8 on: March 12, 2014, 05:02:09 PM »

I made a little oblong box out of plastic, stuck the mikes inside, drilled out for the jack socket and volume control. It fits on the grill of the melodeon with some thick elastic which hooks over the bellows clip. Played around and heard every movement of the buttons and levers so I raised it off the grill with some sticky back felt pads. Preamped with the slightest touch on a digital delay pedal and everything is working well. I know I paid over the odds but anybody who can source the mikes can make a cheap melodeon pickup.

I put it on yesterday for a full amplified band practice and apart from some careful distancing from the foldback speakers, due to feedback, it passed muster with the rest of the band. 
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: internal mikes
« Reply #9 on: March 12, 2014, 08:23:15 PM »

Standard practice amongst Cajun and Zydeco musicians is to mount an R65 dynamic (SM58 capsule) complete with transformer inside the bellows on top of the treble blocks. Use a guitar end-pin jack for the output and smear some glue around the terminals to make it airtight.
Sounds wicked. Some phasing occurs depending on bellows extension but that in itself is a useful effect.
All my boxes have this.
Best run through an EQ pedal.

Great idea, much easier than fiddling round with SM58s (my favourite Mike) on stands.
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: internal mikes
« Reply #10 on: March 12, 2014, 09:54:52 PM »

Slightly at a tangent but piezos work great for making stomp boxes.

Steve
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal mikes
« Reply #11 on: March 12, 2014, 11:51:08 PM »

Great idea, much easier than fiddling round with SM58s (my favourite Mike) on stands.
SM58 is a specialist vocal mic.
SM57 is far better for instruments - indentical capsule, but no foam-filled pop filter to mess up the reponse.

Mind you, I might try one of the those piezos as ACE has done instead of my SM57 on a stand.  At that price, there's almost nothing to lose.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: internal mikes
« Reply #12 on: March 13, 2014, 07:53:40 AM »



Mind you, I might try one of the those piezos as ACE has done instead of my SM57 on a stand.  At that price, there's almost nothing to lose.

I fitted three of them inside my little contraption. One might not be enough for both octaves.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: internal mikes
« Reply #13 on: March 13, 2014, 09:49:49 AM »

I fitted three of them inside my little contraption. One might not be enough for both octaves.

Ah - long thin box, Microvox-style!

I'm a little sceptical, recalling a lengthy conversation with the late Alan Hughes about the amount of research and experimentation he had to do to get his M400 series to sound right and free of unpleasant resonances.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: internal mikes
« Reply #14 on: March 13, 2014, 03:14:46 PM »

Perhaps mine has worked because I just have a single voiced excelsior, which is basically a harmonica with bellows, no other harmonics going on and virtually no button and other noise when I play due to the short lift of the pallets.

Also with the band I am the only lead instrument and I just use the bass end for keeping time. The wall of sound from the rest of the band fills in the gaps. All ex rock band players, electric bass and rhythm guitars and a rock steady drummer.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal