Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Clacky bass buttons  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Clacky bass buttons
« on: April 05, 2014, 11:57:44 AM »

Apologies if this topic has been covered, but I am useless at searching for a thread that deals with it.  I have just got a brand new Compadre and although I do not expect miracles from it, as a budget priced box it aint half bad. But the clacking bass buttons are a bit distracting. Not owning a Hohner for half a century and playing mainly Italian boxes I had forgotton all about the 'Hohner clack' Is there a cure or do I just get selective hearing and hope  it will fade into the overall sound. I do tend to tap the buttons instead of using the big chords.

The box seems relatively well set up and lightish for a 3 row. Time will tell on the quality. Another little fault for me is the air button seeming to dig into the base of my thumb, but I expect that is just the different position compared to my other box and a comfortable 'thumb curl' will develop in time.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Phil B

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Clacky bass buttons
« Reply #1 on: April 05, 2014, 01:36:49 PM »

I bought a ADG Compadre 5 years ago as a stopgap whilst my Corona 3 was having a major service and it has proved to have been a very good buy.
To reduce the clack from the bass I recovered the pallets with a ply of felt Hohner pallet foam from Charlie Marshal and chamois leather, (the felt being fixed to the pallet) it has worked well for 3 years for me 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Clacky bass buttons
« Reply #2 on: April 05, 2014, 01:57:38 PM »

Before launching on replacing the pallet leathers, a good solution for pallet clack, ensure the noise is not the buttons clacking against the casework. I find this is by far the most common and noisiest source of clack from Hohner bass ends. The solution is to remove the buttons and rods and ream out the holes and bush them with proper bushing felt. this is one of the standard jobs I do when upgrading any Hohner.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Clacky bass buttons
« Reply #3 on: April 05, 2014, 02:04:43 PM »

I bought a ADG Compadre 5 years ago as a stopgap whilst my Corona 3 was having a major service and it has proved to have been a very good buy.
 
That is wanted to hear

Thanks  Lester, that sounds like a plan. The sound is more external, so I took it to be 'loose' buttons.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal