Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Opening out Hohner Club bass holes  (Read 2995 times)

0 Members and 1 Guest are viewing this topic.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Opening out Hohner Club bass holes
« on: April 12, 2014, 02:32:05 PM »

I'm wanting to bush the bass keys of a hohner club.  The holes are about 1.5cm in diameter, and need another 1mm or so to accomodate the bushing felt.

When I've done this before for a pokerwork I used a device which was recommended here (picture attached).  I can nether remember where, when or what it is called. 

Anyone know if bigger ones are available and from where?

If not what's the best way to achieve the extra diameter?
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Opening out Hohner Club bass holes
« Reply #1 on: April 12, 2014, 02:43:35 PM »

It is called a reamer.  Widely available from tool suppliers.  It is the best tool for the job, thought one with a slower taper would be a bit of an improvement.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Opening out Hohner Club bass holes
« Reply #2 on: April 12, 2014, 03:58:10 PM »

Yep, reamer's the word.  The net will bring up plenty of options. B&Q do them so does Machine Mart.
Don't confuse them with taps and dies. They're different animals all together. :(
« Last Edit: April 13, 2014, 05:06:55 PM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Opening out Hohner Club bass holes
« Reply #3 on: April 12, 2014, 04:08:12 PM »

The taper reamer that you showed is really intended for fairly thin sheet metal and has quite a fierce taper. It would be good to get you started, but the final hole would have a noticeable taper.
Other tapers are available...
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Opening out Hohner Club bass holes
« Reply #4 on: April 12, 2014, 05:25:20 PM »

Ok, thanks for the help guys - I've bought one of these:

http://www.ebay.co.uk/itm/251380822099

Goes up to 20mm, and I want to open it up from 14 to 15mm, so should do the job.

Do all Club basses click so much? Or did I just get a bad one (or perhaps its my technique).
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Opening out Hohner Club bass holes
« Reply #5 on: April 12, 2014, 05:29:20 PM »

Be very careful Brian, that's designed for metal. Gently Bentley my mum used to say. ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Opening out Hohner Club bass holes
« Reply #6 on: April 12, 2014, 05:57:22 PM »

Be very careful Brian, that's designed for metal. Gently Bentley my mum used to say. ;D

Thanks Nick, yes I realise that - I'll be VERY careful. I think the other one was as well and it worked a treat on my pokerwork.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Opening out Hohner Club bass holes
« Reply #7 on: April 12, 2014, 06:08:42 PM »

If you find the taper is too much you could use the reamer first then use a round file to open up the narrow part.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Opening out Hohner Club bass holes
« Reply #8 on: April 12, 2014, 06:30:44 PM »

I've got one pretty similar to that (which I actually originally bought for use on metal, though that's another story) and I do use it to open out holes in timber to "non-preferred diameters", as the jargon has it. BUT it does need a very light hand; drill some holes in a bit of scrap wood, and use those to practise. Then get some more scrap wood and practise. Then practise some more. After that do some practice. When you REALLY think you've practised enough, try - VERY gently - a hole in the real thing. Otherwise there's nothing to it!

Seriously, these reamers work fine on wood but they do cut very quickly and it's only too easy to go too far (don't ask how I know!). Go slowly and gently and you'll be OK. Oh - and if possible (it isn't always) try to use the reamer from both sides; otherwise you'll end up with a conical hole. As Theo says, a (fairly smooth) round file is good for final truing up.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Opening out Hohner Club bass holes
« Reply #9 on: April 12, 2014, 08:33:29 PM »

Engineers taper pin reamers are more appropriate for careful enlargement . They have a taper of 1/4" per foot, or metric similar value and come in a vast range of sizes. If you look around you can find job lots of a large range of sizes second hand quite cheap.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal