Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Hohner HA-114 basic repair, refurbishment, upgrade?  (Read 14963 times)

0 Members and 1 Guest are viewing this topic.

Ray

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #20 on: April 30, 2013, 11:28:35 AM »

Yeah, I agree with Lester, if they ain't broke, don't fix 'em! Save yourself the hassle I would  (:)
Logged

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #21 on: July 25, 2013, 11:26:01 AM »

Removing/installing the key-lever-pallet assembly
What's the best way to take that tension off when I re-install the key-lever-pallet assembly? Can I wedge a pencil or something between the baseplate and the levers so the pallets are "open" and not pressing against the body? Or is there a smarter way?

If I'm reading this right, what you need to do is unhook the springs for each of the levers, just flick them off from the button end of the pallet lever, then the pallet levers move freely. When you attach the whole thing, screw the base plate back onto the treble end and then put the springs back into place

sorry my comment was nonsense.. but I can't delete the post
« Last Edit: July 25, 2013, 11:52:42 AM by RogerThomas »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #22 on: July 25, 2013, 11:40:38 AM »

You don't need to unhook all the springs to get it back on. If you do need to unhook the springs a (very) long nose set of pliers is ideal, and hooking/unhooking is a lot easier with the key assembly attached to the box than not.

Sorry to contradict, but this is bad advice.  If you do not unhook the springs before removing the screws then the spring tension will tend to tear the wood as each screw is undone, gradually enlarging the screw hole and even after one removal can mean the holes have to be plugged before the screws will grip.

Secondly, long nosed pliers are not the best tool for hooking/unhooking the springs.  A small screwdriver with a notch file in the tip is much more effective.  Of course all the spring hooking/unhooking should be done with the fingerboard removed and the mechanism firmly screwed down.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #23 on: July 25, 2013, 11:47:55 AM »

I know it's been mentioned elsewhere, but it is useful to screw the treble mechanism to a board to work on it - I use an old, cracked beech bread board.  It holds the whole assembly square and straight whilst your working on it.  I also use a crotchet hook to hook on the springs is I can't get my fingers to them and anyway, the index finger gets might sore by the time you've reattached a whole set of springs.

The sheared screw in the fingerboard?  Hopefully the fingerboard will now pull off with a nit of wriggling and the screw held in a vice whilst you unscrew the fingerboard from it?  If there is not enough clearance, then you'll have to withdraw it as far as possible and carefully cut through the screw shaft first - maybe there is a use for a Dremel after all.

Rob.
Logged

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #24 on: July 25, 2013, 11:54:11 AM »

You don't need to unhook all the springs to get it back on. If you do need to unhook the springs a (very) long nose set of pliers is ideal, and hooking/unhooking is a lot easier with the key assembly attached to the box than not.

Sorry to contradict, but this is bad advice.  If you do not unhook the springs before removing the screws then the spring tension will tend to tear the wood as each screw is undone, gradually enlarging the screw hole and even after one removal can mean the holes have to be plugged before the screws will grip.

Secondly, long nosed pliers are not the best tool for hooking/unhooking the springs.  A small screwdriver with a notch file in the tip is much more effective.  Of course all the spring hooking/unhooking should be done with the fingerboard removed and the mechanism firmly screwed down.

Yes I realised this and have removed the original text. Apologies.

gm0lze

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 101
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #25 on: April 08, 2014, 07:05:06 AM »

Any suggestions on how to stop the stoppers slipping (apart from the elastic band job) as they are very loose on my HA113.
Thanks for any feedback.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #26 on: April 08, 2014, 04:01:13 PM »

Several people here have their own (and poached) methods for keeping the stops where you left them.  One person advises applying a little reed wax (cold) to the rod to increase the stiction, rather like waxing a surfboard.  Another has drilled blind holes into the case to house neodynium magnets alongside each rod - very hi-tech!  As I always play with all stop open, I slit some pipe caps and pushed them onto the rods under the knobs.... cheapskate, me!  I've even known somebody imperceptibly bending the rods so that they act as a spring within the hole, but that seems like a high risk strategy to me.

Rob.
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #27 on: April 08, 2014, 07:16:12 PM »

Not forgetting the clothes pegs.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #28 on: April 08, 2014, 09:03:02 PM »

Magnets are best.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #29 on: April 08, 2014, 09:09:25 PM »

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #30 on: April 09, 2014, 06:38:47 AM »

I like the magnet idea a lot.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner HA-114 basic repair, refurbishment, upgrade?
« Reply #31 on: April 09, 2014, 07:34:59 AM »

I like the magnet idea a lot.
It does have a certain attraction.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal