Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Glue to stick down pearloid on liliput?  (Read 3151 times)

0 Members and 1 Guest are viewing this topic.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Glue to stick down pearloid on liliput?
« on: August 08, 2014, 11:12:03 AM »

I have a "new" liliput, which has some of the pearloid coming away.  I presume I should do my best to get some sort of glue underneath the lifted pearloid as far as I can and then clamp it down for an extended period?

Would PVA do?
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Glue to stick down pearloid on liliput?
« Reply #1 on: August 08, 2014, 03:09:05 PM »

I have a "new" liliput, which has some of the pearloid coming away.  I presume I should do my best to get some sort of glue underneath the lifted pearloid as far as I can and then clamp it down for an extended period?

Would PVA do?

Hmm! Good question . As it's not likely to be removed again I don't see why not. I'm sure our Fettlers will having something to say though.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glue to stick down pearloid on liliput?
« Reply #2 on: August 08, 2014, 03:28:54 PM »

Pva should work.  I usually use superglue because it penetrates to the extremities that thicker glue will miss. You have to be careful to avoid getting any on the outside surface of the pearloid.  Originally it would have buyin glued with celluloid dissolved in acetone, but that is a nuisance to prepare, and can end up softening the material so that you get marks from clamping.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Glue to stick down pearloid on liliput?
« Reply #3 on: August 08, 2014, 03:41:46 PM »

I'm with Theo, I use superglue

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Glue to stick down pearloid on liliput?
« Reply #4 on: August 08, 2014, 04:05:24 PM »

I've never needed to reglue pearloid (though I have a box awaiting restoration that will need just that), so I defer to the experience of others; the only thing that would put me off using cyanoacrylate is that it's usually not too great on organic materials - in this case wood - and normally requires scrupulously clean and close fitting mating surfaces. That said, I don't have any better suggestions! I might try Gorilla Glue.... if I do, I will report back.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

East Clare Box Player

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Glue to stick down pearloid on liliput?
« Reply #5 on: August 08, 2014, 05:06:21 PM »

I am aware that older accordion's "pearloid" (actually celluloid) is soluble in acetone.  I think the procedure back in the day was to soak sheets of celluloid in acetone to make the sheets "rubbery",  They are then pulled and stretched over the wooden bodies of the accordions by hand and they stick without additional adhesive.  It was gnarly work with lots of VOCs to make one's head soft and pliable as well.

I would use acetone to soften the underside of the pearloid that is pulling up.  Apply with a brush.  It will become soft and can be pushed back into place, secured with blue masking tape/rubber bands/ whatever.
Do this outside. I would use no additional adhesive, as it may not be compatible with the celluloid, may add thickness to the surface or otherwise uglify the box.
If you can't find acetone, it is available in small quantities as "nail polish remover". 

Don't get it on the surfaces you don't want to stick. 
Logged
Your mileage may differ.  Mine does.

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Glue to stick down pearloid on liliput?
« Reply #6 on: August 08, 2014, 06:45:32 PM »

Actually as I look at it again I can see that is is actually the 1st layer of wood/ply that is coming away (i can see the pearloid layer on top of it).  So really it is a need to glue the top layer of wood back onto the next layer. I guess PVA will do in this case.
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Glue to stick down pearloid on liliput?
« Reply #7 on: August 08, 2014, 06:53:47 PM »

Actually as I look at it again I can see that is is actually the 1st layer of wood/ply that is coming away (i can see the pearloid layer on top of it).  So really it is a need to glue the top layer of wood back onto the next layer. I guess PVA will do in this case.

I would probably still used superglue as it has less bulk than PVA allowing the repair to 'sit down' better and thus be less visible.

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Glue to stick down pearloid on liliput?
« Reply #8 on: August 08, 2014, 07:31:03 PM »

on new boxes I think the pearloid is laid over the wooden carcass and then heated in an oven so it moulds itself to the shape as well as sticking to the carcass.  ??

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Glue to stick down pearloid on liliput?
« Reply #9 on: August 08, 2014, 07:42:05 PM »

on new boxes I think the pearloid is laid over the wooden carcass and then heated in an oven so it moulds itself to the shape as well as sticking to the carcass.  ??

george

I beleive you are almost entirely wrong George  ;)

https://www.youtube.com/watch?v=yW9l--AM7UA

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Glue to stick down pearloid on liliput?
« Reply #10 on: August 08, 2014, 09:51:48 PM »

agreed!

george :-[
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Glue to stick down pearloid on liliput?
« Reply #11 on: August 09, 2014, 12:03:43 AM »

While destined for pen barrels this shows from what, and how decorative celluloid is made........

https://www.youtube.com/watch?v=ocxPiLgwuv0

Fancy marbling with acetone Mr C-B?  :o
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

sammypenn

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Glue to stick down pearloid on liliput?
« Reply #12 on: August 09, 2014, 09:19:45 AM »

 Be careful when dealing with old coverings, before acetone they used Nitrate which if heated can burst into flames,
    The real pearloid comes from a Peru where it is grown as a cash crop its rather like a large accordion shaped onion, when full grown it's layers are carefully removed to cover boxes from the largest to the smallest, But there was always the smallest piece left over and had to be thrown away, Till Mr Hohner said wait a cotton picking moment I've got a stonking  idea, those English will go for anything, and so the Liliput was invented, the rest is history
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Glue to stick down pearloid on liliput?
« Reply #13 on: August 09, 2014, 12:15:37 PM »

If you check your woodworking or hobby store, there are "super glue" formulas for gluing wood that work very well for this sort of thing.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

gavdav

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Glue to stick down pearloid on liliput?
« Reply #14 on: August 14, 2014, 03:22:03 PM »

I have just built a new grille section for a paolo soprani version of a dino red pearl III, and I used wood glue/pva and it worked fine. I tested first with just stretching the stuff around the wood, using hide glue, then good old PVA which worked wonders.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Glue to stick down pearloid on liliput?
« Reply #15 on: August 14, 2014, 04:31:34 PM »

Most "posh" nail polish removers contain "added value" elements such as lanolin and I'm not sure what that's do to pearloid, so get the really cheap stuff. (I was a cosmetics buyer for Boots in an earlier life)
Logged
  _       _    _      _ 
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal