Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Gasket for 1930s Erika  (Read 1705 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Gasket for 1930s Erika
« on: September 21, 2014, 01:33:24 AM »

Ill soon be opening my 1930's Bb/Eb Erika to install some felt under the keyboard, to reduce travel. (felt courtesy of Malcolm Clapp, many thanks). Thanks also to those here who gave pointers on how to proceed.

I'm not sure of the history of this instrument, however it may be the first time it has been opened. I'm expecting to find the original gasket.

The instrument,  while playable, could be more airtight. I'm assuming that a gasket replacement might help with this. What gasket should I use, how should I apply it? Again, any links to pics etc most appreciated.
Logged
Harmonica Player
Just starting with the Box

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Gasket for 1930s Erika
« Reply #1 on: September 21, 2014, 07:28:52 AM »

Ill soon be opening my 1930's Bb/Eb Erika to install some felt under the keyboard, to reduce travel. (felt courtesy of Malcolm Clapp, many thanks). Thanks also to those here who gave pointers on how to proceed.

I'm not sure of the history of this instrument, however it may be the first time it has been opened. I'm expecting to find the original gasket.

The instrument,  while playable, could be more airtight. I'm assuming that a gasket replacement might help with this. What gasket should I use, how should I apply it? Again, any links to pics etc most appreciated.
Charlie Marshall's yer man. Excellent service. Cannot fault him. He sends stuff everywhere in the world.

Self-adhesive bellows gasket here:
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Gasket.html

Clean off the old gasket and carefully scrape off any residual glue and gunge.

Cut a single length of gasket to go entirely around the the bellows frame, plus a inch or so extra for good measure.

Apply the new bellows gasket by simply removing the backing tape a bit at a time and gradually press the gasket into place. Take care not to stretch it as you apply. it is flexible enough to go round the 90° corners of the bellows frame.

To join up to your starting point, lay a slight overlap of gasket over the top of your starting end, then using a sharp blade, cut vertically through both layers at about a 45° angle to the length. Carefully remove the superfluous portions of gasket to leave you with a nice clean diagonal butt joint.

It's one of the easiest maintenance jobs to do.  (:)

However, bear in mind that air leaks may also be caused by holes in the bellows corner gussets, or along the folds; or by leaky pallets. Also, if the instrument has never been opened before, the reed valves will almost certainly be curled or missing, which will affect the response and tuning. Reed wax, if used, will need renewing.

In short, if the instrument has had nothing done to it for 80+ years the playability, tuning and sound will be much improved by addressing these sorts of issues first. Unless there is a severe and obvious failure of the bellows gasket, renewing it is usually the final job I carry out in any restoration/repair work. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Gasket for 1930s Erika
« Reply #2 on: September 21, 2014, 07:40:36 AM »

There's also the possibilty of an air leak in the joint between reedblocks and base/sound/fondo/whatever board; a slight leak can often be cured with a new gasket in that location, but you can also find that the blocks have warped slightly, in which case they will need flattening before refitting leaving the original reedblock gasket in place.  Tracing air leaks can take an age; best of luck!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Gasket for 1930s Erika
« Reply #3 on: September 21, 2014, 10:40:31 AM »

Bellows gasket replacement is cheap and easy, so always wort trying.  To be a good air leak fixer you should adopt the approach of a detective. Air will escape from anywhere it can, pallets, failing glued joints anywhere, screw holes, and old bellows simply become porous.  I finally got my Erika airtight by fitting new bellows, but only after I had sealed many other leaks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Gasket for 1930s Erika
« Reply #4 on: September 21, 2014, 03:11:46 PM »

 We have been here before. Gas fitters use a benign type of smoke injection. That would show a leak instantly.
Safety warning....... Don't blow pipe or cigarette smoke into it. " you know it makes sense" 😝
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: Gasket for 1930s Erika
« Reply #5 on: September 21, 2014, 04:32:57 PM »

I briefly in the 1980s worked with a guy who used a cigarette lighter to hunt down a leak in a gas pipe. He said it was only a small leak as it was only a faint smell! Luckily he didn't find it.

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: Gasket for 1930s Erika
« Reply #6 on: September 21, 2014, 04:35:02 PM »

BTW, after you've done all the other maintenance jobs on your box and come to the new gasket, go for the 3x5mm rather than the 2x6mm.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Gasket for 1930s Erika
« Reply #7 on: September 21, 2014, 11:31:47 PM »

Thanks all. This will be enough to get me started. The instrument is playable as is, so enhancements like the gasket and keyboard limiting will make it more so.

I'm doing some gigs at local markets, so the Erika will get an outing. I also have a bag on the way from CGM.
Logged
Harmonica Player
Just starting with the Box
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal