Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 [5]   Go Down

Author Topic: Refurbishing a Hohner 1040  (Read 14481 times)

0 Members and 1 Guest are viewing this topic.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Refurbishing a Hohner 1040
« Reply #80 on: April 05, 2015, 01:18:12 AM »

Noooooo - you've forgotten to put all those carefully crafted Hohner clacks back in it boxcall - if you've lost them somewhere during the fettling, PM me you snailmail and I can send you some of my spares in an envelope  ;D

If you are not pleased with your progress so far, you should be its looking good and tuning apart, see above.........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Refurbishing a Hohner 1040
« Reply #81 on: April 05, 2015, 01:41:42 AM »

Thanks Rees
I'm pretty happy with it so far, I need to do a little more tweeking.
It's a lot nicer to play now, not as clacky. I limited the buttons (I just used a strip of self adhering felt, the stuff that you'd use on furniture legs etc. seems to work) what do others use?

I have one note that does not respond as the others , sounds a little weak it's on the push.
I'll most likely let the tuner figure it out, I guess maybe a gap or maybe valve issue.
I did get a little wax on a couple valves but cleaned it off and they seemed to be moving freely and laying flat still
Maybe I should have just replaced them, I'm I the only messy waxer out there or does this sort of thing happen to the best of them?

Noooooo - you've forgotten to put all those carefully crafted Hohner clacks back in it boxcall - if you've lost them somewhere during the fettling, PM me you snailmail and I can send you some of my spares in an envelope  ;D

If you are not pleased with your progress so far, you should be its looking good and tuning apart, see above.........
It is a lot quieter now I will pm you if I miss them (:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Refurbishing a Hohner 1040
« Reply #82 on: April 11, 2015, 07:59:49 PM »

So I'm getting this box tuned and was wondering how to describe "original tuning"?
Maybe the folks at the button box already know but in case they ask what should I say.
It's stamped 880 in the box which I believe is the A note.
I know I need to say something more than wet ;) so how many hertz or cents would Hohner have use?
Also does one bank get tuned right on and the other get tuned slightly sharp? I guess this is done by taping over hole under pallets for each bank of reeds.
I love the loudness of these little boxes and would like to maintain that.
Thanks for any advise!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: 1 2 3 4 [5]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal