Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Gasflowing the exhaust manifold!  (Read 4115 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Gasflowing the exhaust manifold!
« Reply #20 on: January 05, 2016, 02:32:10 PM »

So many unknowns and variables!  Thinking a little deeper (not much - a bear of very little brain) into the issues, the fact that each single chamber is servicing both a pull and a push reed points to them having entirely different flow characteristics as the flow is in opposite directions for the two reeds, one with the chamber upstream and the other downstream in their flow.  Intuitive thoughts "see" the push reed as chopping a flow of air which is emitted to the outside world, so one expects to hear it, whereas the same simple visualization doesn't work on a pull reed - the air is flowing into the bellows, not out to my ears!  It's amazing to me that one can hear the pull reeds at all other than a muffled noise inside the bellows.  I'm already in too deep, but as has been said, the lower reeds don't have the restrictions and sharp edges so the argument that flowing these might offer improvements doesn't apply.  Perhaps rounding those edges would improve the sound level from the upper reeds but it's not high on my priority list to test it out.  Strange though that some boxes such as the BPII can really sing out at the upper end of the range whereas others seem a little muted as the pitch increases.

Rob.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Gasflowing the exhaust manifold!
« Reply #21 on: January 05, 2016, 03:23:13 PM »

Loudest, sweetest best playing box I have had in my hands was a no name Italian 2 row 8 bass made of beech plywood., maple keyboard, modest bellows.
No name reeds but obviously hand made as they were crude as were the poplar reed blocks.

No attempt was made to slick , trick this box.

This is not unlike the ( pre new era)  usually pre WWII   flamenco guitars, often made of cypress or maple with tops that would not pass scrutiny today because they had 4-6 growth line per inch rather than the modern 12 plus expected.
Rosewood fingerboards rather than ebony, simple rosewood friction pegs, simple rosettes, binding and purfling.  Saw and chisel marks abound... finishes were shellac some French polished (crudely)..
but the sound.. indescribable.

I believe the key was the Colin Chapman theory  " add lightness"...  This may also be the case with the no name Italian 2 row.
« Last Edit: January 05, 2016, 03:25:22 PM by melodeon »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #22 on: January 05, 2016, 04:15:54 PM »

As far as I know, push and pull notes can have similar issues with high reeds not sounding properly, but the bulk airflow patterns (e.g. turbulent vs laminar) would be quite different between push and pull.
That suggests it's more likely to be it's an acoustics problem than airflow, to the limited extent that they are different things.
Depends what you mean by "acoustics" -- this normally means sound propagation and resonances in cavities/structures bigger than a wavelength, where you can get big pressure/velocity/vibration differences across the structure. Since the reed chambers in a melodeon are much smaller than a wavelength even for the highest notes, you can't get any such effects inside them since the pressure must be almost uniform everywhere inside the chamber, so none of the analogies about acoustics and resonances in larger structures and instruments apply here.

Without these pressure differences the effects of chamber size must be on airflow into/past the reeds and pressure differences, or possibly a Helmholtz resonance where the mass of the air in the pallet hole resonates with the compliance of the air inside the chamber -- though since the chamber is not sealed due to air leakage past the reed, I'm not sure how significant this is once the reed is moving, but it may affect reed startup when the reed almost closes the hole in the frame.

Things smaller than a wavelength and larger behave completely differently in both sound/light/electricity (reflection/diffraction, resonances/propagation, lumped circuits/transmission lines), extrapolating to one from the other invariably isn't valid...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #23 on: January 05, 2016, 04:23:34 PM »

So many unknowns and variables!  Thinking a little deeper (not much - a bear of very little brain) into the issues, the fact that each single chamber is servicing both a pull and a push reed points to them having entirely different flow characteristics as the flow is in opposite directions for the two reeds, one with the chamber upstream and the other downstream in their flow.  Intuitive thoughts "see" the push reed as chopping a flow of air which is emitted to the outside world, so one expects to hear it, whereas the same simple visualization doesn't work on a pull reed - the air is flowing into the bellows, not out to my ears!  It's amazing to me that one can hear the pull reeds at all other than a muffled noise inside the bellows.  I'm already in too deep, but as has been said, the lower reeds don't have the restrictions and sharp edges so the argument that flowing these might offer improvements doesn't apply.  Perhaps rounding those edges would improve the sound level from the upper reeds but it's not high on my priority list to test it out.  Strange though that some boxes such as the BPII can really sing out at the upper end of the range whereas others seem a little muted as the pitch increases.

Rob.

Think about it more carefully -- in one case the air flows out past the reed with bits "chopped out" of the airflow, creating positive pressure and airflow outside when the reed is open and zero when it is blocked, in the other case the air flows into the bellows creating negative pressure and airflow outside when the reed is open and zero when it is closed.

The sound waveform is the difference between this and the average pressure (the DC content is removed leaving only the AC). One AC waveform is then the inverse of the other (which can be seen looking at the waveform if the on:off ratio is asymmetrical) but our ears are not sensitive to phase, so both push and pull reeds sound the same.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Gasflowing the exhaust manifold!
« Reply #24 on: January 06, 2016, 12:54:02 PM »

Thanks, Ian,

I guess the difficulty is wanting to "visualize" the propogation of the sound and as you say, using other forms of energy as an analogy leads to misunderstanding.  If I'm now getting closer to comprehending the mechanism of sound production (in layman's terms) then the airflow through the reed is not creating the tone in the way one thinks of a qind instrument, projecting a column of vibrating air but more a localised pressure event  at the interface between box and the outside world.  Of course, increased airflow, up to the limit of the reeds' capabilities, determines the volume of sound by the amount of energy imparted to the reed and the pressure differential of the induced event. 

The remaining unknown for me is why some boxes are so directional in their sound projection, then!  Perhaps this is defined by the shape depth and transmission qualities of the casing around the action.  A case in point would be an open (no grille) four-stop, which is hardly directional at all.  Maybe this is why manufacturers are piercing the casings so as to affect the radiation pattern rather than increase the sound level?

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #25 on: January 06, 2016, 10:11:56 PM »

Thanks, Ian,

I guess the difficulty is wanting to "visualize" the propogation of the sound and as you say, using other forms of energy as an analogy leads to misunderstanding.  If I'm now getting closer to comprehending the mechanism of sound production (in layman's terms) then the airflow through the reed is not creating the tone in the way one thinks of a qind instrument, projecting a column of vibrating air but more a localised pressure event  at the interface between box and the outside world.  Of course, increased airflow, up to the limit of the reeds' capabilities, determines the volume of sound by the amount of energy imparted to the reed and the pressure differential of the induced event. 

The remaining unknown for me is why some boxes are so directional in their sound projection, then!  Perhaps this is defined by the shape depth and transmission qualities of the casing around the action.  A case in point would be an open (no grille) four-stop, which is hardly directional at all.  Maybe this is why manufacturers are piercing the casings so as to affect the radiation pattern rather than increase the sound level?

Rob.
You're correct, the way that free reed instruments generate and propagate the sound is very different to other instruments, even beating reed instruments (clarinet, sax, bagpipes...) which depend on a resonant column of air to synchronise the reed vibrations -- the air column sets the frequency, which is why one reed can cover up to two octaves or more. A free reed just delivers a chopped-up airstream as a fixed frequency set by the reed and this generates the sound, all the rest of the instrument does is affect how this sound gets to the outside air.

Boxes are directional (at higher frequencies) largely because of the sound shielding effect of the case, when the reeds are effectively at the back of a box with closed sides and one open surface this tends to direct the sound at right-angles to the pallet board. Ones built with the pallets flat on the outside of the case with a raised grille over them (e.g. Oakwood) or no obstruction at all (four-stop one-row) suffer less from this than ones with deeper cases (e.g. Hohner), you can measure this with a microphone. This is exactly why some manufacturers are piercing the front of the case to let more sound out forwards, but often the free area of the holes is not really big enough -- for example in speaker grille design the rule-of-thumb to prevent sound attenuation is that the holes should be at least 50% of the area.

This still only applies where the size of the box is significant compared to the wavelength (mid and treble frequencies), lower and bass notes are effectively omnidirectional. Bigger and deeper boxes (e.g. Handry) become directional at lower frequencies than small ones (e.g. Lilly) so more of the midrange is fired outwards instead of forwards, this is probably another reason why small boxes sound more piercing and shriller to the audience and big ones sound sweeter -- it's all to do with the way the sound is dispersed.

You can find a lot about this by reading up on speaker design, a lot of the same principles apply...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Gasflowing the exhaust manifold!
« Reply #26 on: January 07, 2016, 08:55:32 AM »

You're correct, the way that free reed instruments generate and propagate the sound is very different to other instruments, even beating reed instruments (clarinet, sax, bagpipes...) which depend on a resonant column of air to synchronise the reed vibrations -- the air column sets the frequency, which is why one reed can cover up to two octaves or more. A free reed just delivers a chopped-up airstream as a fixed frequency set by the reed and this generates the sound, all the rest of the instrument does is affect how this sound gets to the outside air.

Boxes are directional (at higher frequencies) largely because of the sound shielding effect of the case, when the reeds are effectively at the back of a box with closed sides and one open surface this tends to direct the sound at right-angles to the pallet board. Ones built with the pallets flat on the outside of the case with a raised grille over them (e.g. Oakwood) or no obstruction at all (four-stop one-row) suffer less from this than ones with deeper cases (e.g. Hohner), you can measure this with a microphone. This is exactly why some manufacturers are piercing the front of the case to let more sound out forwards, but often the free area of the holes is not really big enough -- for example in speaker grille design the rule-of-thumb to prevent sound attenuation is that the holes should be at least 50% of the area.

This still only applies where the size of the box is significant compared to the wavelength (mid and treble frequencies), lower and bass notes are effectively omnidirectional. Bigger and deeper boxes (e.g. Handry) become directional at lower frequencies than small ones (e.g. Lilly) so more of the midrange is fired outwards instead of forwards, this is probably another reason why small boxes sound more piercing and shriller to the audience and big ones sound sweeter -- it's all to do with the way the sound is dispersed.

[/quote]
Several years ago, I was playing around with different ways of creating oscillating air columns in the context of generating "sounds" within the range of human auditory perception. For wind instruments, the most common ways are beating reeds, lip reeds, and fipples. I made some drones which used a vibrating membrane. I found that I could put an air column on both sides of the diaphram and get two air columns excited with one oscillator. Furthermore, when I changed a variable one one side of the diaphram in affected the other side, so there was a coupling involved. I wonder what linkages are present in the free reed/reedblock/air passage configuration?
Logged
I'm squeezin' and they're wheezin': old junker boxes

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #27 on: January 07, 2016, 11:15:59 PM »

Several years ago, I was playing around with different ways of creating oscillating air columns in the context of generating "sounds" within the range of human auditory perception. For wind instruments, the most common ways are beating reeds, lip reeds, and fipples. I made some drones which used a vibrating membrane. I found that I could put an air column on both sides of the diaphram and get two air columns excited with one oscillator. Furthermore, when I changed a variable one one side of the diaphram in affected the other side, so there was a coupling involved. I wonder what linkages are present in the free reed/reedblock/air passage configuration?

There shouldn't be any such linkages between resonances, the only resonance setting the pitch should be that of the free reed -- all the other factors just modify the way that air gets in and sound gets out (yes the air loading has a very weak effect on the pitch but it's tiny compared to the reed). If there are any other resonances like in the reed blocks (the cause of "warbling" between reeds, hopefully fixed by reed block bracing) these are a bad thing not a good one, they either sap energy from the reed vibration or cause tuning problems.

There really is very little commonality between free reed instrument sound and beating reed/air column (wind) or stringed instruments (soundboards etc), any attempt to extrapolate cause and effect from one to the other is almost always wrong :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal