Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Attaching gooseneck mic to a box  (Read 2121 times)

0 Members and 1 Guest are viewing this topic.

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Attaching gooseneck mic to a box
« on: August 05, 2016, 06:52:08 PM »

In thinking of ways to amplify my Castagnari Big 18, I was wondering if anyone had thoughts on a good way to affix a gooseneck mic to the treble side and on placement for the bass side mic. At this point my best idea is to use some velcro tape stuck near the "Castagnari" and attached to the clip of my gooseneck mic for the treble side. I figured I'd ask for some advice before potentially gumming up my box with some tape (though functionality far outweighs looks in my book).

For the bass side, I am thinking I can just clip it to the strap and weave the gooseneck into a secure position, preferably pointing away from the air hole.

Pictures attached to try and illustrate what I am working with.

Thanks,
Baron
« Last Edit: August 07, 2016, 05:51:40 PM by Baron Collins-Hill »
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

benammiswift

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 158
  • Squeezing for Derbyshire
    • benammiswift.co.uk
Re: Attaching gooseneck micc to a box
« Reply #1 on: August 05, 2016, 08:35:17 PM »

Velcro on the top of treble like Saul Rose and then he uses a sweat band with the mic clipped to it. Or you could go Sophie Cavez wat and put the treble mix on the first fold of the bellows. Other people attach a small block of wood to the box using epoxy and clip on that

Just a few ideas

Benammi
Logged
Castagnari Handry 18

benammiswift

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 158
  • Squeezing for Derbyshire
    • benammiswift.co.uk
Re: Attaching gooseneck micc to a box
« Reply #2 on: August 06, 2016, 09:01:22 AM »

To be honest, everyone is different and if it works for you then do it. I think the things with the system that Saul uses and I intend to use is that we have Handrys so theres plenty of room to clip a mic to your wrist whereas as on a smaller, more box like the big 18 it may interfere with the feet or the bass strap. Give it a go and if you don't like it the way you're doing it is very good. I'd just always be a bit weary with the clipping to the strap because I have knocked mics if the bass strap by accident before and the ending isn't a happy one for the audience's ears haha

Benammi
Logged
Castagnari Handry 18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Attaching gooseneck micc to a box
« Reply #3 on: August 06, 2016, 09:19:30 AM »


Pictures attached to try and illustrate what I am working with.


That mic placement may be too close to the instrument which could result in the midrange being louder than the high note and the low notes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Attaching gooseneck micc to a box
« Reply #4 on: August 06, 2016, 09:31:22 AM »

On my Lilium I used small self-adhesive velcro patches on the top end of the box. See attached photo. These matched up with and secured the base-plates of the AKG 416 goose-neck mics which I used when playing in ceilidh bands. The mic base plates had the 'hook' half of the self-adhesive velcro, the patches on the instrument were the 'fluffy' half. The ends of the mics clipped into a channel on the mic base plate and I led the mic cables down the sides of the box next to the bellows pins, held in place by small pieces of transparent insulating tape which was removed after each gig.

I was able to angle the mics sufficiently far away from the grilles to even up the sound from the high and low notes (like Theo warns of) and over all, the sound was pretty good and normally free from feedback problems

The down-side of this arrangement was that it was a real faff changing instruments.

These days, I don't use the gooseneck mics much and I prefer stand mics which allows me to change instruments easily.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Attaching gooseneck micc to a box
« Reply #5 on: August 06, 2016, 01:53:57 PM »

In thinking of ways to amplify my Castagnari Big 18, I was wondering if anyone had thoughts on a good way to affix a gooseneck mic to the treble side and on placement for the bass side mic. At this point my best idea is to use some velcro tape stuck near the "Castagnari" and attached to the clip of my gooseneck mic for the treble side. I figured I'd ask for some advice before potentially gumming up my box with some tape (though functionality far outweighs looks in my book).

For the bass side, I am thinking I can just clip it to the strap and weave the gooseneck into a secure position, preferably pointing away from the air hole.

Pictures attached to try and illustrate what I am working with.

Thanks,
Baron

As Theo said, with such a short gooseneck you'll get very uneven pickup with the treble end mic positioned as you showed.

If you can't get a mic with a longer gooseneck, you'd be best attaching it to the top face of the grille -- the smooth end piece that you see if you look at the box when playing it -- as close to the edge as possible so it's as far away from the grille as you can get it, then aim it at the grille over the highest notes. The low notes will still be closer but they'll be quieter because they're off-axis for the mic.

On the bass end I'd do the same thing -- attach it to the top edge like the treble end mic but in the opposite direction, and point it down towards the lower set of sound-holes -- the upper set will be closer but off-axis, sam as the treble end.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Attaching gooseneck micc to a box
« Reply #6 on: August 07, 2016, 01:23:23 PM »

goose necks seem put you between a rock and a hard place.

set the mike too close to the keys and you get imbalance and key noise, too far away and you're likely to need more gain therefore making unwanted room noise and feedback more likely.

I prefer microvox where the mikes are right up against the grille and there are three or four to cover the whole range of reeds.   For anything less than recording they're a good solution IMHO
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Attaching gooseneck micc to a box
« Reply #7 on: August 07, 2016, 02:23:46 PM »

goose necks seem put you between a rock and a hard place.

set the mike too close to the keys and you get imbalance and key noise, too far away and you're likely to need more gain therefore making unwanted room noise and feedback more likely.

I prefer microvox where the mikes are right up against the grille and there are three or four to cover the whole range of reeds.   For anything less than recording they're a good solution IMHO

A theoretical problem rather than a real one in my experience. I've never had any noise or feedback trouble with gooseneck for the bass end or mics on a stand about a foot away from the treble and, and that includes playing in the Committee Band right next to Rob Gifford's drum kit so I like plenty of box in the foldback. With a stand mic it is easier to position it to avoid feedback if that is a problem, because it doesn't move around.

Speaking as somebody who's tried one and mixed for a band using one, Microvoxes are very close to the keys/pallets and pick up a lot of noise, they also don't really have enough capsules to get even pickup of all notes, you get some noticeably louder than others. The ones I've tried also have a tendency to overload when you punch in loud right-hand chords on a loud box -- not a problem if you don't do this, but I do and mics clipping sound horrible when that happens :-(
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Attaching gooseneck micc to a box
« Reply #8 on: August 07, 2016, 03:22:54 PM »

Horses for courses

I play melody line with no chords on either side.  I chiefly use MVox on a Pokerwork with traditionally clacky keyboard but key noise isn't an issue in our (chiefly Irish) mix.

other plus is that, with the power unit velcroed to the top of the r/h side, there aren't any sticking-out bits to snag cables etc while the thing's sat on the floor in front of me and I'm playing a different instrument.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal