Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How *FAR* can you retune a reed?  (Read 2776 times)

0 Members and 1 Guest are viewing this topic.

Datsen

  • Member
  • *
  • Offline Offline
  • Posts: 4
How *FAR* can you retune a reed?
« on: May 04, 2016, 01:48:56 PM »

So I'm fixing up an old 'International Accordeon' C/C#. I'm in the middle of replacing the valves, but I expect after that I'll still need to retune some bum notes. So while I'm at it, I'd like to change some of the layout.

From what I read on here, it should be possible to file the C#/G# bass pair up a semitone, to Dm/Am (which would give me a decent accompaniment for playing in C/F). However, I'd also like to change the low F by two steps, to a low A (notice how I really like minor keys). Would that be possible?

Thanks folks.  (:)
« Last Edit: May 04, 2016, 01:56:29 PM by Datsen »
Logged
Downsizing CBA player.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: How *FAR* can you retune a reed?
« Reply #1 on: May 04, 2016, 02:55:08 PM »

You don't mention (and it could be very significant in this context) what pitch the notes are at present. The original pitch of International boxes made for the British market (which your C/C# one presumably was) is likely to be Old Philharmonic, with the tuning tempered, so that some notes are already 70 cents sharp anyway - making it a piece of cake to tune up to the next semitone. But if somebody's already tuned it down to equal-tempered A=440, I'd hesitate to take bass notes back up again, and especially from F to A.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How *FAR* can you retune a reed?
« Reply #2 on: May 04, 2016, 03:37:18 PM »

I find the question a bit confusing (but I'm old so bear with me).

The Bass pair, C#/G#, are not chords so can't be tuned to Dm/Am assuming you mean D minor/A minor. These reeds should easily by fileable up to D/A.

I assume you also want to tune the C#/G# chords to Dm/Am

C# major - C# - E#(F) - G#
G# major - G# - B#(C) - D#

D minor - D - F - A
A minor - A - C - E

Again this looks easily doable as the reeds only have to go a maximum of a semitone.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: How *FAR* can you retune a reed?
« Reply #3 on: May 04, 2016, 06:51:23 PM »

I was looking at the Old Hohner C/C# keyboard layout, trying to understand your question (I must be old too...).

When you say low F, do you mean the lowest button on the C# row or are you referring to something on the bass/chords side ?
Logged

Datsen

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: How *FAR* can you retune a reed?
« Reply #4 on: May 04, 2016, 10:18:59 PM »

Lester: yep that's just what I meant. I'll sharpen the bass reeds, and the root and fifth on the chord, and leave the thirds alone to get Dm/Am.

Tirpous: This isn't quite like an 'old' hohner. It's got 19 trebles (the top buttons are missing) and four spoons, and where there'd be a low A on the bottom button there's an F. That's what I want to change. (ETA: when I say 'top button' I mean the one playing the highest note. Like the top string of a guitar. Is that right?)

Triskel: It seems to be around A=450, but with it being a bit out of tune anyway it's hard to tell. I can see the signs of tuning but I assume that's from when it was made.
« Last Edit: May 04, 2016, 10:46:31 PM by Datsen »
Logged
Downsizing CBA player.

Datsen

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: How *FAR* can you retune a reed?
« Reply #5 on: May 04, 2016, 10:28:57 PM »

It looks like this, to anyone who doesn't know this company:

http://www.mimo-db.eu/media/SMS-MM/IMAGE/X12_01.jpg
Logged
Downsizing CBA player.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: How *FAR* can you retune a reed?
« Reply #6 on: May 05, 2016, 03:31:45 AM »

It looks like this, to anyone who doesn't know this company:

http://www.mimo-db.eu/media/SMS-MM/IMAGE/X12_01.jpg

Well now I'm thoroughly confused/bemused because the chromatic accordion in your photos don't appear to be one made by International Accordion - a brand that I have a great interest in, and around 30 examples of.

And it says "Steel Bronze Reeds" (= hard brass), so they're probably on long plates (?) and not the individual Dix steel reeds that you'd get in an International...

Datsen

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: How *FAR* can you retune a reed?
« Reply #7 on: May 06, 2016, 01:35:02 PM »

Okay! I'd assumed it was an international, but yeah it doesn't say international on it. The metal on the frames say Olewo.  Sorry for the confusion.

Inside, yes. The reeds are brass, and each row is on one long reed plate.
Logged
Downsizing CBA player.

nigelr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 526
Re: How *FAR* can you retune a reed?
« Reply #8 on: August 31, 2016, 02:44:28 PM »

Resurrecting this thread rather than start a new one.

Could existing F#3/B3 and B3/D4 buttons be retuned to G3/A3 and B3/C4 respectively without the need to buy new reeds?  One stays the same and one goes up by a semitone, but the other 2 would need to change by a tone (up and down).  Is this too much?

Thanks
Logged
DB Oakwood Super 2 (D/G), Club II (D/G Will Allen layout), Erika (Bb/Eb) and an HA114 in C

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How *FAR* can you retune a reed?
« Reply #9 on: August 31, 2016, 03:25:17 PM »

I've done those changes successfully several times,  those lower reeds are quite large and the F# will go up to G without a problem.  The F# usually has a sizeable section of full thickness steel near the tip.  Similarly for D3 down a tone, as long as you do it by loading the reed tip and not by filing the belly of the reed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nigelr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 526
Re: How *FAR* can you retune a reed?
« Reply #10 on: August 31, 2016, 03:42:46 PM »

I've done those changes successfully several times,  those lower reeds are quite large and the F# will go up to G without a problem.  The F# usually has a sizeable section of full thickness steel near the tip.  Similarly for D3 down a tone, as long as you do it by loading the reed tip and not by filing the belly of the reed.
Many thanks.  Definitely not something I intend on trying myself but my new box might be winging its way to a fettler sometime soon (:)
Logged
DB Oakwood Super 2 (D/G), Club II (D/G Will Allen layout), Erika (Bb/Eb) and an HA114 in C
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal