Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Front cover screw for Dino BPII needed  (Read 1177 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Front cover screw for Dino BPII needed
« on: September 11, 2016, 10:04:21 PM »

One of the knurled screws holding the front panel of my Dino Black Pearl II has gone AWOL. It is 3mm but unfortunately not the usual M3 thread.

Anyone suggest where I might be able to obtain a replacement, the same or similar?

TIA
Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Front cover screw for Dino BPII needed
« Reply #1 on: September 11, 2016, 10:16:31 PM »

Charlie Marshall
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Front cover screw for Dino BPII needed
« Reply #2 on: September 12, 2016, 12:13:57 AM »

Charlie Marshall
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Front cover screw for Dino BPII needed
« Reply #3 on: September 12, 2016, 07:00:34 AM »

I've emailed Charlie, but I must admit he didn't immediately come to mind for Dino parts (unlike many other things).
However, if he carries them or it's a standard thread, problem solved. 
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Front cover screw for Dino BPII needed
« Reply #4 on: September 12, 2016, 08:05:06 AM »

Hi Malcolm
If you send me a pic I think it is an accordion grill screw,also measure the top,I mat have one

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Front cover screw for Dino BPII needed
« Reply #5 on: September 28, 2016, 02:34:16 PM »

Thanks Pete,

Charlie's screw was an exact match.  (:)

Ordered 6pm yesterday, arrived in today's post, fitted by lunchtime   :o  :||:
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal