Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Removal of (very) old masking tape  (Read 2705 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Removal of (very) old masking tape
« on: October 23, 2016, 05:18:26 PM »

Hi,
I need to remove some very old masking tape from some bellows. It's been used on corners where the metal corner is missing. Any suggestions on the best way to shift it and its residual adhesive?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removal of (very) old masking tape
« Reply #1 on: October 23, 2016, 05:21:15 PM »

The tape should, if all crumbly just pull off. To remove adhesive residue I usually use WD40 but not sure if it would be suitable on bellows card??

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Removal of (very) old masking tape
« Reply #2 on: October 23, 2016, 05:23:32 PM »

If the stickum that remains is still sticky use mineral spirits or kerosine to remove it (not lacquer thinner). The old powdery stickum can be carefully scraped away and the remainder removed with the same.

You can get old tape that you are scared to pull off to loosen by painting it with the same solvents, or you may want to try a hair dryer on it and see if that makes it let go.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Removal of (very) old masking tape
« Reply #3 on: October 23, 2016, 05:42:06 PM »

Or you could stick more on, over the top, to keep the character of the box!!!!!!!!!!!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Removal of (very) old masking tape
« Reply #4 on: October 23, 2016, 08:33:48 PM »

The hair dryer worked, thanks Kimric, even removing the underlying concealed clear sticky tape. The masking tape was very hard and initially looked like it could come off all in large destructive lumps.

Most of the remaining icky is on the bellows tape and celluloid - masking tape had also been used as bellows gasket.

Now have several gaping corners to think about. Oddly enough this is all on the chin end, the bottom and back have buckle rash but otherwise OK.

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Removal of (very) old masking tape
« Reply #5 on: October 29, 2016, 09:07:50 PM »

If the stickum that remains is still sticky use mineral spirits or kerosine to remove it (not lacquer thinner). The old powdery stickum can be carefully scraped away and the remainder removed with the same.

You can get old tape that you are scared to pull off to loosen by painting it with the same solvents, or you may want to try a hair dryer on it and see if that makes it let go.

I have found that laquer thinner is the most effective solvent for removing masking tape adhesive, but shouldn't be used on instruments with a laquered finish. Alcohol will damage a shellaced or french polished finish. Naptha (lighter fluid) will sometimes work weil and has traditionally been used by camera repair techs to clean mechanical shutters. I don't usually work on boxes which have a "mother of toiletseat" covering, but, in such cases, I would first test the reaction to the solvent of choice in an inconspicious location. Kerosene(parrafin) leaves a slight oil residue, which could interfere with future finishing or glueing if the area isn't "degreased" afterwards. I usually "tease" off as much of the tape as possible with an oil painter's pallet knife. I work the blade under a loose edge and genntly lift and or push/ wiggle the blade around in whatever manner results in progrees. I have used this process to successfully remove making and medical adhesive tape. I have had mixed success removing the residual adhesive, after the tape is removed, using scrapers made from various plastic scraps, wood, and cuticle tools originally purposed for manicures.
« Last Edit: October 29, 2016, 09:10:36 PM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Removal of (very) old masking tape
« Reply #6 on: October 29, 2016, 09:18:39 PM »

Thanks  (:)
I've got the tape off, the residue is largely on the bellows tape but there is some on the paper. I will try Lester's suggestion of WD-40 on the celluloid.
I have alcohol (of suitable and probably unsuitable varieties) but was wondering about lighter fluid. 
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Removal of (very) old masking tape
« Reply #7 on: October 29, 2016, 09:32:56 PM »

I used to work with a guy who had a Phd in physics, he analyized the ingredients of WD-40 and found that it consisted primarily of kerosene and a masking scent.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Removal of (very) old masking tape
« Reply #8 on: October 30, 2016, 05:32:55 AM »

Lighter fluid "benzine" won't touch it Malcolm
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Removal of (very) old masking tape
« Reply #9 on: October 30, 2016, 10:08:13 AM »

Cheers Nick. Just remembered, we have some stuff to remove labels, will try that.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Removal of (very) old masking tape
« Reply #10 on: November 01, 2016, 05:19:51 AM »

There is a product known by the trade name of "goof off" which is marketed as a household adhesive remover. I haven't tried this personally. It is also possible to purchase "stoddard solvents" which reportedly is the solvent used in the garment dry cleaning process. It is also sold under ther brand name energine.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal