Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air leak in my Darwin, advice appreciated  (Read 2439 times)

0 Members and 1 Guest are viewing this topic.

laurenth

  • Member
  • *
  • Offline Offline
  • Posts: 40
Air leak in my Darwin, advice appreciated
« on: April 30, 2016, 07:50:20 PM »

Hello all,

my second hand Darwin has a noticeable air leak. At first I thought it just had less compression than my Loffet, but now that I've investigated further there clearly is a leak.

When I force the bellows without any button ressed, I can move it almost easily, and I can hear a flow at the top of the key board (bass end).
Since it does not activate any reed, I think this is not a pallet issue, but I can't see any other place where the air could go through...


Any advise, opinion, suggestions... more than welcome!

I'm considering putting some painter's tape instead of the reeds block for the accidentals row, to check if this changes something, is it wise, or may it damage something?

Laurent
Logged
Laurent :||:

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air leak in my Darwin, advice appreciated
« Reply #1 on: April 30, 2016, 09:00:49 PM »

It is quite possible for a pallet to leak but not enough to sound the reeds.
It can also be the air valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Air leak in my Darwin, advice appreciated
« Reply #2 on: April 30, 2016, 09:43:32 PM »

I recently used masking tape to identify a pallet leak, as you describe. It worked quite well. Don't stick it on too hard, just very gently, and don't leave it on there.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

laurenth

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Air leak in my Darwin, advice appreciated
« Reply #3 on: May 01, 2016, 07:25:18 PM »

Thanks for your advice.

I compared with my friend's Gaillard (yes, my frien and I tend to liek nice instruments ;-) ) and both are about leaking as much... may be I'm over concerned?

I'll try to investigate, still, as air is too precious to let it go that way !
Logged
Laurent :||:

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Air leak in my Darwin, advice appreciated
« Reply #4 on: May 01, 2016, 07:43:25 PM »

Does it happen worse on the push than the pull?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

laurenth

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Air leak in my Darwin, advice appreciated
« Reply #5 on: May 02, 2016, 05:55:37 PM »

Does it happen worse on the push than the pull?

I may be a tad easier on the push, but it's almost the same.
Logged
Laurent :||:

laurenth

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Air leak in my Darwin, advice appreciated
« Reply #6 on: November 20, 2016, 07:06:49 PM »

Hello all,

I thought I'd post an update since, finally, I found the leak(S)!
I tried several times, until today when I taped the reed blocks with no differences and finally used a flashlight to look for the issue. I had to try several times, particularly for the third row, but now my Darwin is almost as tight as my Loffet!

I also spent time "massaging" stuck treble reeds, and got some nice results by "curling" them a bit like I d on my harmonicas.

Laurent
Logged
Laurent :||:

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Air leak in my Darwin, advice appreciated
« Reply #7 on: November 20, 2016, 07:47:36 PM »

Do you mean curling the valves? Before someone experiments.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

laurenth

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Air leak in my Darwin, advice appreciated
« Reply #8 on: November 20, 2016, 08:00:48 PM »

Do you mean curling the valves? Before someone experiments.

No, I mean curling the reeds thewselves, so that they do no rest flat in the block. I had two "dead" reeds on the extreme treble end of the keyboard.

I felt adventurous, but have tried it on harmonicas with great results, so I thought it was worth a try. But one has to be very cuatu=ious here to avoid breaking the reed.
Logged
Laurent :||:

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Air leak in my Darwin, advice appreciated
« Reply #9 on: November 20, 2016, 08:45:07 PM »

Blooming heck. I'll try to forget that trick.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

laurenth

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Air leak in my Darwin, advice appreciated
« Reply #10 on: November 21, 2016, 07:03:55 AM »

Blooming heck. I'll try to forget that trick.

I'm not sure "curling" is the right word, it may be "gaping" the reeds.

May be better to avoid trying if you don't feel confident/never tried on a cheap instrument. Harmonicas tend to need some tweaking when brand new, this is usually not the case with accordions. But I wonder what happens to a Pokerwork if one applies similar tricks to it.
Logged
Laurent :||:

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Air leak in my Darwin, advice appreciated
« Reply #11 on: November 21, 2016, 08:17:33 AM »

Blooming heck. I'll try to forget that trick.

I'm not sure "curling" is the right word, it may be "gaping" the reeds.

May be better to avoid trying if you don't feel confident/never tried on a cheap instrument. Harmonicas tend to need some tweaking when brand new, this is usually not the case with accordions. But I wonder what happens to a Pokerwork if one applies similar tricks to it.

Any melodeon will not perform at its best if the reeds are not set up properly. Even new high-end instruments may benefit from attention.

Setting up the reeds involves all these tasks:

1. Checking all the valves are working properly and replacing as necessary.
2. Ensuring the reed plates are firmly fixed to the reed blocks (renewing wax, gaskets, etc, if required).
3. Adjusting the reed tip gap to just the right 'sweet spot' opening, so that the reed speaks clearly and promptly - neither a delayed breathy response, nor a weak, easily choked off response. This is probably the hardest job to get right and requires care and patience.
4. Tuning and fine-tuning to the player's/customer's requirements.

Overall, it's not a process to be undertaken lightly, but when done properly it can dramatically improve how an instrument responds and sounds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal