Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Removing the Bass End from a Modell 1 Erika  (Read 2194 times)

0 Members and 1 Guest are viewing this topic.

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Removing the Bass End from a Modell 1 Erika
« on: May 15, 2017, 02:32:21 PM »

What it says on the tin, really

I need to get at the chord mechanism on my Bb/Eb...bit of a tumble (it not me...) and one of the bass buttons has broken and jammed.

Any advice, other than be really, really careful ?

Ta
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Removing the Bass End from a Modell 1 Erika
« Reply #1 on: May 15, 2017, 03:03:39 PM »

There should be a hole near each end of the bass strap. This is to give screwdriver access to the two screws that hold the ends on.  If you can't find the screws that way just take off the strap and remove the bass cover plate and you should see the two large round screw heads.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Removing the Bass End from a Modell 1 Erika
« Reply #2 on: May 15, 2017, 03:43:48 PM »

There should be a hole near each end of the bass strap. This is to give screwdriver access to the two screws that hold the ends on.  If you can't find the screws that way just take off the strap and remove the bass cover plate and you should see the two large round screw heads.

Thanks Theo...just realised it's a Club, not an Erika.

Should the process be the same?
Logged
On the edge of Cheshire's Golden Triangle, apparently...

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: Removing the Bass End from a Modell 1 Erika
« Reply #3 on: May 15, 2017, 06:17:20 PM »

Thanks Theo.  Always wondered what those holes were for.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Removing the Bass End from a Modell 1 Erika
« Reply #4 on: May 15, 2017, 06:49:06 PM »



Thanks Theo...just realised it's a Club, not an Erika.

Should the process be the same?

Just take a look and see!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Removing the Bass End from a Modell 1 Erika
« Reply #5 on: May 15, 2017, 06:54:45 PM »



Thanks Theo...just realised it's a Club, not an Erika.

Should the process be the same?

Just take a look and see!

Plucking up the courage.... :Ph
Logged
On the edge of Cheshire's Golden Triangle, apparently...

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: Removing the Bass End from a Modell 1 Erika
« Reply #6 on: May 15, 2017, 07:23:49 PM »

just this wto you need to remove,as it happens I was working on one  8)
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Removing the Bass End from a Modell 1 Erika
« Reply #7 on: May 15, 2017, 07:27:30 PM »

It sounds like you just want to get in to where the bass mechanism is Baz, rather than take the whole end off as such?

In which case (depending on date and exact model) you need to either unscrew the 4 small screws (with washers on them) that are adjacent to the feet, or (just possibly) you may have one that has feet integral with catches that swivel on/off the screws that hold the bass end board on...

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Removing the Bass End from a Modell 1 Erika
« Reply #8 on: May 15, 2017, 09:16:47 PM »

It sounds like you just want to get in to where the bass mechanism is Baz, rather than take the whole end off as such?

In which case (depending on date and exact model) you need to either unscrew the 4 small screws (with washers on them) that are adjacent to the feet, or (just possibly) you may have one that has feet integral with catches that swivel on/off the screws that hold the bass end board on...

the latter. I feel

Ta
Logged
On the edge of Cheshire's Golden Triangle, apparently...

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Removing the Bass End from a Modell 1 Erika
« Reply #9 on: May 16, 2017, 07:28:42 PM »

... you may have one that has feet integral with catches that swivel on/off the screws that hold the bass end board on...

the latter. I feel

In that case, you may find it easier if you first slacken the screws off slightly, so the feet/catches can turn more easily.

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Removing the Bass End from a Modell 1 Erika
« Reply #11 on: May 18, 2017, 06:48:10 PM »

That'll be they then...

Ta...please accept this virtual pint... :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Removing the Bass End from a Modell 1 Erika
« Reply #13 on: May 18, 2017, 06:57:36 PM »

Sometimes, often,when disturbed the block of wood the foot screw is located in to will fall off or come off with the end.Just glue it back overnight with wood glue and may be a gentle clamp if it does make sure it goes back flush to the end in the same place. If you want to be quick use a super glue its not under much tension
Logged
Mark Taylor
Folkloristmark
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal