. . .
I recently came across the image attached below. In the light of our discussion re six reed pallet mechanisms the dual pallet mechanism in the pictured six stop single row is of interest.
ATB
Mike
Hi Mike,
Following up on the old photo your posted above, of one of those "giant multi-voice 1 row" boxes. For a time, Theo had (and restored) a really cool Herfeld 6-voice 1-row box in D, that tempted many of us. Beautifully shown here:
http://forum.melodeon.net/index.php/topic,15795.msg194173.html#msg194173For additional comparison, here are some large 1-row boxes made in Vienna.
First photo: on the left, an unrestored Wilhelm Lubich 4-stop box in G, voiced MHHH (relative to the typical "low" octaves of G rows, for example in a typical G/C accordion - it would be LMMM relative to the higher octaves of G used for a typical D/G box). Pitch is ca A = 435, reeds are zinc-plate Dix. This accordion was much played over the years, and repaired by Karpek in Milwaukee WI. Nice brass-knobbed stops, similar to those on the other box in that photo. All the pallets on this accordion are above the keyboard.
First photo: on the right, an unrestored Franz Hochholzer Jun. 6-stop box in C#, with the main melody voiced in LMMH but also with 2 extra sets of melody voices tuned to harmonize (mostly major and minor sixths above the main melody voices).* Pitch is ca A = 443, reeds are zinc-plate with crown stamp. This accordion has extra pallets behind the keyboard for 2 of the voices.
Two additional photos: two views of an unrestored Lubich 8-voice box, currently en route to me. Described as having reeds stamped with a "star" (possibly a sun representing Sonntag reeds?). More info when it arrives!
PG
* compare earlier discussions of "quintro" tuning (maybe not quite the same as this Hochholzer?):
http://forum.melodeon.net/index.php/topic,14395