Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Button removal from 10 button diatonic  (Read 2757 times)

0 Members and 1 Guest are viewing this topic.

Mark Luckasavage

  • Vintage Hohner Fan
  • Member
  • *
  • Offline Offline
  • Posts: 34
  • Hohner 499, Hohner Echophone, Hohner Morino VM
Button removal from 10 button diatonic
« on: January 06, 2019, 12:14:26 AM »

I need to replace some missing buttons. It seems the bone buttons are glued on the assembly. Is this true? How can I remove the buttons? Also, if I wanted to remove the keyboard assembly, is it just a simple matter of removing a pin under each wooden lever?
« Last Edit: January 06, 2019, 02:15:45 AM by Mark Luckasavage »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 10 Button Diatonic button assembly removal
« Reply #1 on: January 06, 2019, 01:35:05 AM »

I've only removed this type of button in order to salvage them for future use. I just twisted them off with a pair of pliers. (But I have no finesse!) I'm sure someone will come along and tell you the proper way, shortly.
The wooden levers will have a metal axle going right through them all, from one end of the keyboard to the other, and they can be a right b*****d to get out. If you can possibly manage with it in place, then do so; and save yourself a major headache!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Mark Luckasavage

  • Vintage Hohner Fan
  • Member
  • *
  • Offline Offline
  • Posts: 34
  • Hohner 499, Hohner Echophone, Hohner Morino VM
Re: Button removal
« Reply #2 on: January 06, 2019, 02:01:25 AM »

I added a pic of an eye screw on the side. Maybe this attaches to the metal axle that goes through the wooden levers? Winston, do you know where I can get these buttons?
« Last Edit: January 06, 2019, 02:29:46 AM by Mark Luckasavage »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Button removal
« Reply #3 on: January 06, 2019, 05:58:48 AM »

I added a pic of an eye screw on the side. Maybe this attaches to the metal axle that goes through the wooden levers?
Yes, the 'eye screw' is the looped end of the brass axle which goes all the way through the length of the keyboard and which the wooden levers pivot on. As Edward has said, the axle is very tricky to remove, especially if there has been any slight corrosion along the way. Ideally you need to disengage all the lever springs first, but I can't see if this is possible from your photos. Otherwise you will have to gradually twist and pull it out against the resistance of the springs and friction of the levers. Once the axle has been removed, it is even more tricky to get it back in again.

The brass axle is not particularly strong and in pulling it out or reinserting it there is a real risk of bending it or even breaking it, rendering it all useless. Only attempt to remove the axle if you really, really must, e.g. if some of the lever arms are binding on the axle.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Button removal from 10 button diatonic
« Reply #4 on: January 06, 2019, 07:34:26 AM »

I would not recommend removing the key axle rod unless you have to replace the springs under the keys. If you do remove it you will probably find that removal is easier than replacement. I use a hand crank "eggbeater" drill to slowly rotate the rod while pulling it out or pushing it in. I use a drill with a two jaw chuck to grip the little loop of the axle. A three jaw chuck won't grip the loop without distorting it. It is possible to dissassemble the front end of the keyboard without removing the axle. There is a full length piece which is the thumb rest and a flat strip over the keys where the buttons emerge. These parts were originally assembled with hot hide glue and can be dissassembled with a jet of carefully placed stram or with a heated knife. I usually use an artist's pallet knife. I have made replacement bone parts from sections of cow femur. I have a photo of a partially dismantled keyboard, but I don't currently have the software to reduce the photo file size to meet the forum posting requirements.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Button removal from 10 button diatonic
« Reply #5 on: January 06, 2019, 07:42:22 AM »

It is sometimes possible to get hide glue to release by shock loading it, for example by tapping with a small prescision watchmaker's hammer. There is a hazard of fracturing the wood of the key if you are heavy handed in this approach. I have used this technique to remove temporarily installed wooden cleats used to allow clamp purchase when gluing cranks in antique instrument soundboards.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Button removal from 10 button diatonic
« Reply #6 on: January 06, 2019, 09:28:21 AM »

I think you will find that the buttons will come off easily with a sharp tap.  Use a short length of wood as a drift.  The glue will not be very strong, that’s why there are so many buttons missing.
Replacement buttons like these are simply not available.  You have a choice: either make your own, or cannibalise another instrument. 

You can remove the whole keyboard by removing two screws from inside the instrument.  I’d strongly advise against removing the axle rod.  Broken springs can usually be replaced by “keyhole surgery “ from the back once the keyboard is removed. You will also need to learn how to make replacement springs to match the existing ones.  It’s not difficult!  The only indication for removing the axle rod is if some keys are seized.  Assuming you can get it out I recommend replacing it with a steel rod of exactly the same diameter.

You have taken on some of the most difficult tasks in melodeon repair,  so take your time.

Edited to add:   I was viewing your post on mobile phone and didn't see the photos, clearly you have removed the keyboard from the rest of this instrument. 

« Last Edit: January 06, 2019, 12:16:01 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Barlow

  • Bad player, good talker apparently
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 111
  • Castagnari Lilly B/C Erica D/G
Re: Button removal from 10 button diatonic
« Reply #7 on: January 06, 2019, 10:46:23 AM »

I have a photo of a partially dismantled keyboard, but I don't currently have the software to reduce the photo file size to meet the forum posting requirements.
Microsoft Paint will be on your PC if you are Windows based, and allows easy reduction of a picture file size. Save it as a new file name to prevent overwriting the original.
Logged
. . .

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Button removal from 10 button diatonic
« Reply #8 on: January 06, 2019, 12:05:52 PM »

Hi Mark.
A friend of mine used to own a similar very old instrument to yours that he had restored,  like yours his had lost some treble buttons, and I seem to recall that he was able to replace them with modern plastic ones such as are fitted to Hohner Pokerworks or Ericas ......   and probably other models as well (obtainable from Charlie marshall or directly from Hohner).
 I think he had to enlarge the holes in the fingerboard slightly, but from what I remember the result was perfectly effective although if your after absolute period accuracy bone buttons or or possibly salvaged Casein plastic ones would be more correct depending on the age of your instrument.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Button removal from 10 button diatonic
« Reply #9 on: January 06, 2019, 12:12:59 PM »

to replace them with modern plastic ones such

Noooo! modern plastic button will look terrible on this!   What a thing to suggest.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Button removal from 10 button diatonic
« Reply #10 on: January 06, 2019, 01:48:50 PM »

to replace them with modern plastic ones such

Noooo! modern plastic button will look terrible on this!   What a thing to suggest.


Sorry to offend your aesthetic sensibilities Theo !!………    I agree they wouldn't look "right", but I was simply suggesting a practical alternative if absolute period authenticity wasn't essential !!.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Button removal from 10 button diatonic
« Reply #11 on: January 06, 2019, 02:37:14 PM »

how big are the buttons? I have a old single rows kept as parts I can send you the buttons if it helps?
Logged

Mark Luckasavage

  • Vintage Hohner Fan
  • Member
  • *
  • Offline Offline
  • Posts: 34
  • Hohner 499, Hohner Echophone, Hohner Morino VM
Re: Button removal from 10 button diatonic
« Reply #12 on: January 06, 2019, 03:32:27 PM »

I'm going to replace the buttons with similar era ones. I now realize removing the axle rod is a really bad idea. The springs under the keys are fine so I don't want to make more work than required. I'm leaning towards Theo's solution by giving it a sharp tap using a piece of wood as a drift. I'll need to be very careful as I don't want to damage the buttons or the wooden levers.

Is it a bad idea to use a hair dryer and heat up the button and gently use cloth covered tweezers to gently remove the button?

When I do get the buttons off I will post a picture showing it's dimensions.
« Last Edit: January 06, 2019, 03:38:12 PM by Mark Luckasavage »
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Button removal from 10 button diatonic
« Reply #13 on: January 06, 2019, 04:53:13 PM »

My experience with animal glue is either to heat it up to soften it then gently prize apart the bits or work on it cold. As Theo says it can be quite weak and brittle when it's old and cold will enhance the brittleness.
Admittedly my experience is mostly on chairs and veneers, but little bits of furniture trim often pop off with a sharp tap from a stick of wood. Once you warm something up it becomes awkwardly sticky again until it's hot enough to melt the glue.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Button removal from 10 button diatonic
« Reply #14 on: January 07, 2019, 09:28:18 AM »

I have a photo of a partially dismantled keyboard, but I don't currently have the software to reduce the photo file size to meet the forum posting requirements.
Microsoft Paint will be on your PC if you are Windows based, and allows easy reduction of a picture file size. Save it as a new file name to prevent overwriting the original.
I don't have a windows os PC, using IOS cell phone.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Button removal from 10 button diatonic
« Reply #15 on: January 07, 2019, 09:38:57 AM »

on IOS phone you can compress photos with no extra software.
1) use the edit feature in Photos to crop out unwanted parts of the photo.
2) email the photo to yourself and choose one of the smaller options presented to you when you press send
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mark Luckasavage

  • Vintage Hohner Fan
  • Member
  • *
  • Offline Offline
  • Posts: 34
  • Hohner 499, Hohner Echophone, Hohner Morino VM
Re: Button removal from 10 button diatonic
« Reply #16 on: January 09, 2019, 02:10:10 AM »

Hello fellow melodeon fans,

Attaching top and side view of my buttons. They are made of bone and look light brown. The hole diameter is 12.5 MM, the button is 10.5 MM diameter and I think the button height is 9.0 MM. Anything close would be much appreciated! I can Paypal you for the buttons and shipping.

Best regards,
Mark
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Button removal from 10 button diatonic
« Reply #17 on: January 10, 2019, 11:11:05 PM »

Hi Mark, I'm measuring the buttons I have right now and they are way too small and white plastic buttons, 9mm diameter,5mm height with extra wooden disk under it, I guess to get the right height 3mm wooden disk added under the button total height is around 8/9mm..if any good you can have them all 10.     
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal