Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: A little tweak to the air button  (Read 702 times)

0 Members and 1 Guest are viewing this topic.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
A little tweak to the air button
« on: March 29, 2019, 01:46:11 AM »

I'm trying various left hand positions to try and get my stubby little fingers to get around better, and it seems easier if I use my strap at almost the "wristwatch" location. The issue I started having is my air button is hard for me to find when my hand is that far up.
So I made a new one. my box is from the early to mid 1920's (with new reeds now) according to Bob Snope from the Button Box.
Not even sure what to call it, but its almost identical except for decoration and grill to a contemporary pokerwork. If anyone knows the model I'd be interested to know. The idea was too make the new button project out almost twice as far as my little stubby original one.
here's the original button and you can also just make out the combination rotating clasps and hard metal "bumps" (hard to call them bumpers) that held the back panel on.
I made a somewhat taller  button for the air valve out of the shaft of an ivoroid fiddle peg, just the right diameter and I'm pretty sure a very similar type of plastic,  The issue, of course is that now my button was taller than my bumpers. So I resolved to replace them. they sucked anyway and three out of four screws that hold the back panel on were mostly or completely stripped out. I decided to do it right, and use threaded insets and 10-32 machine screws to both hold the new taller, softer bumpers on, and serve to close the back panel as it needs to come off to work on the bass pallets and such. It quickly became obvious that the spruce end grain corner blocks the old screws went into were not going to survive threaded inserts, one was cracked through already! So I made some nice hard maple corner blocks, evicted the old spruce ones carefully and glued the new ones in and drilled and installed my inserts. my little button project took quite a while when you include figuring out how to make an oblong slot in the bottom of the new button to slip over the mechanism for the air valve. I ended up making the slot by drilling out a hole and then heating a small screwdriver with a match and melting out the rest of the slot. worked great.
[/img]
« Last Edit: March 29, 2019, 01:58:48 AM by Mark Leue »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal