Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Differentials .....  (Read 977 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Differentials .....
« on: November 12, 2020, 03:36:09 PM »

In creating the tuning 'gap' between the '0' reed and the 'other' for tremolo effect, does it matter if the 'other' reed is "flat" or "sharp" of the '0' ?

ie. if the A4 is at '0' cents.....can the 10 cent gap ( if 10 it be ) be cents 'flat' as opposed to cents 'sharp' across the range ?



 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Differentials .....
« Reply #1 on: November 12, 2020, 03:42:49 PM »

Convention has it that they are sharp but I can see ne reason why flat would not work, or indeed Viennese with half sharp/half flat

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Differentials .....
« Reply #2 on: November 12, 2020, 03:54:28 PM »

Thanks Lester.....it is a 3-voice box, so Dedic/Viennese wouldn't apply, but it is in an old tuning where the '+' reed is virtually "at" pitch, just a little low.  The old '0' reed is low, low......it will make sense to tweak the old + reeds to '0' and bring the low reeds up to the - degrees under, rather than have to do extensive work on all of them.

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Differentials .....
« Reply #3 on: November 12, 2020, 03:57:18 PM »

Thanks Lester.....it is a 3-voice box, so Dedic/Viennese wouldn't apply, but it is in an old tuning where the '+' reed is virtually "at" pitch, just a little low.  The old '0' reed is low, low......it will make sense to tweak the old + reeds to '0' and bring the low reeds up to the - degrees under, rather than have to do extensive work on all of them.


If the pitch reed is flat and the + reed is at pitch my punt would be that the box is not tuned to A440. Boxes in old pitch tend to present like this

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Differentials .....
« Reply #4 on: November 12, 2020, 04:56:04 PM »

the box is not tuned to A440. Boxes in old pitch tend to present like this

It wasn't, Lester.....it will be now and I have decided to tune it 'up' to '0' "+", rather than '0' "-" to be conventional ( after a fashion )
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Differentials .....
« Reply #5 on: November 12, 2020, 05:04:38 PM »

the box is not tuned to A440. Boxes in old pitch tend to present like this

It wasn't, Lester.....it will be now and I have decided to tune it 'up' to '0' "+", rather than '0' "-" to be conventional ( after a fashion )

But if it is a 3 voice it should be -/0/+
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Differentials .....
« Reply #6 on: November 12, 2020, 06:15:08 PM »

It is LMM, Theo, so from research here, I (thought I ) understood it should be L at '0' and an M at '0' and the 2nd M at '+'......
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Differentials .....
« Reply #7 on: November 12, 2020, 06:55:02 PM »

Convention has it that they are sharp but I can see ne reason why flat would not work, or indeed Viennese with half sharp/half flat
Acoustico-psychologically, whatever you like to call it (I just invented that word), instruments which are slightly sharp always sound better than ones which are slightly flat. The latter sound dull and unappealing. If you have to play out of tune, it's better to be sharp rather than flat.:o

I guess this is partly what is driving 'pitch creep' away from A=440 in international orchestras. Despite A=440 supposed to be the International Pitch Standard, many European orchestras (and hence wind/brass instruments built for players in those orchestras) now tend to use A=442 standard, while some Japanese orchestras have pushed it as far as A=444 in the quest for brilliance. While British and American players with instruments built to A=440 standards can just about cope with A=442, playing at A=444 is usually too far to play in tune with, so professional players going on a Far East tour now need to equip themselves with extra, purpose built instruments. It's all getting very silly and chaotic. Good news for instrument makers though.

Returning to melodeons, many Italian boxes are tuned to A=442, or at least the tremolo reed is sharp-tuned, not flat-tuned, so that the overall perceived pitch is approaching the A=442 standard. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal