Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: coupler repair  (Read 849 times)

0 Members and 1 Guest are viewing this topic.

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
coupler repair
« on: June 05, 2021, 12:28:27 PM »

I purchased a Hohner Club 111M with coupler problems - tried to fix, but made it worse. (5 coupler). I should like to fix myself, but wonder if there is a technique to tackle. I suspect that the mechanism where it joins with the Reed block sliders has become detached and may have been incorrectly reattached by someone - pictures of correct linkage would help. Can’t see any prior advice on coupler repair.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: coupler repair
« Reply #1 on: June 05, 2021, 12:45:51 PM »

I have a spare coupler if you get totally lost. Better if you can sort it out in situ though.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: coupler repair
« Reply #2 on: June 05, 2021, 04:08:46 PM »

Thanks, but it is the linkeage from the couplers to the reedblocks where the poblem lies and not, I think, in the coupler mounting itself.
It may be that the reconnections will need to be in a specific order which is why I thought there might be a technique.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: coupler repair
« Reply #3 on: June 05, 2021, 04:36:09 PM »

The usual place these get disconnected is where the little lever hooks into a slot on the end of the register slide in the reed block.  Because of where it is situated photos may not be much help.  When replacing a reed block it usually helps to pull the slide out a couple of inches which then means you can hook the end of the slide onto the lever and then carefully telescope the block along the slide to fit the block in place.    It doesn't matter which order you do the blocks. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: coupler repair
« Reply #4 on: June 06, 2021, 07:53:46 AM »

With the reed blocks removed, do the buttons work? If you observe the little vertical rods which should engage with a slot in the block slider (when the block is in place), do they swing back and forth as you operate the coupler buttons?
If yes a) the coupler buttons/linkages are ok and b) then follow Theo's instruction. If not, or they are v stiff, you need to free up/fix them.
With the blocks removed, do the sliders move freely in the blocks? If not there may be a bend or kink in the slider, which you need to resolve...as the couplers won’t work. If yes, then follow Theo's instruction and it should all work ok.
Note: treat the block sliders with kid gloves. The slightest kink will stop them operating.
« Last Edit: June 06, 2021, 07:56:25 AM by RogerT »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal