Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fitting Hohner bellows to Scandali CF box  (Read 563 times)

0 Members and 1 Guest are viewing this topic.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Fitting Hohner bellows to Scandali CF box
« on: May 15, 2023, 05:04:06 AM »

I have a little Scandali CF box which I really love.
It is dry tuned with Tipo Mano reeds and very powerful.
The bellows need replacement and I ordered a set of Hohner Poker work bellows from Charlie and they arrived today.
They fit just nicely BUT!!....There is a gap between the bellows frame and the inside of the box.
It seems to be circa 2mm all round but hard to tell.
Question is?
Do I pack up the bellows frame or the box itself?
And what with?
Okay ...you will say....WOOD!
I was wondering would sheet cork be a better idea as it is more compressible  than wood therefore creating a seal even before the main gasket comes in to play?
Thoughts please?
Pete
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fitting Hohner bellows to Scandali CF box
« Reply #1 on: May 15, 2023, 09:15:17 AM »

The best solution I think would be to remove the Hohner frames from the bellows and fit the original instead.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Fitting Hohner bellows to Scandali CF box
« Reply #2 on: May 15, 2023, 01:11:21 PM »

The best solution I think would be to remove the Hohner frames from the bellows and fit the original instead.
Theo!......I just did not think of that!!
Of course....thats the answer.
Thank you!
I will start tomorrow.
If
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Fitting Hohner bellows to Scandali CF box
« Reply #3 on: May 17, 2023, 08:04:08 AM »

The best solution I think would be to remove the Hohner frames from the bellows and fit the original instead.
Theo!......I just did not think of that!!
Of course....thats the answer.
Thank you!
I will start tomorrow.
If
Theo...I have done it now and it works a treat.
I was very worried when I seperated the new bellows from their frames and even thought " I think I have buggered up a brand new set of bellows".
But I re taped the end parts and after having removed all the old ( animal ) glue from the original frames I re glued the new bellows to the old frames and prayed.
All good!!!
I have lightly pinned the new bellows and frames to the box and.......Voila!! ...perfect.
Thats still using the old leather gasket inside the box!
I will renew it as who ever put it there did not do a neat job.
I will do a neat job and then it probs won't work!!
Thats melodeons!!!!
The bellows seal on these little Scandalis is on the inside. Bellows frame to sound plate thingey!!!
You know what I mean.
Whats it called?
The bit with the holes drilled in?
Aghhh. Pete..you are hopeless.
Thanks Theo.
To me...that was pretty major but I did it.
So satisfying.
Pete
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal