Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: HA112/3/4 blocks  (Read 1178 times)

0 Members and 1 Guest are viewing this topic.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
HA112/3/4 blocks
« on: June 12, 2023, 05:57:08 PM »

Rees on here posted this last June.
I wondered if anyone else has tried this method and what was the outcome?


Re: Rewaxing 4-stop Hohner.
« Reply #20 on: June 03, 2022, 11:17:50 AM »
ReplyQuote
My method is to remove all the reeds and then place it over a pan of boiling water, reed-blocks facing into the pan..
This softens the glue and the blocks come out easily.
It's worth blocking off the rest of the treble end to keep the steam away from the other glued parts, otherwise the whole thing could fall apart.
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: HA112/3/4 blocks
« Reply #1 on: June 12, 2023, 05:59:42 PM »

P.s. I am not doubting your abilities Rees!
Thinking more of us amateur fettlers.
« Last Edit: June 12, 2023, 06:01:24 PM by gettabettabox »
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: HA112/3/4 blocks
« Reply #2 on: June 13, 2023, 12:12:31 PM »

It works on anything glued with Fish/Animal glue. It is traditional method in joinery and the same method is also used to remove high end guitar necks. These days you can pick up a steam cleaner very cheaply or a clothes steamer, perfect for the job. AtB mory
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: HA112/3/4 blocks
« Reply #3 on: June 13, 2023, 02:06:17 PM »

Thanks Mory. Good idea.
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: HA112/3/4 blocks
« Reply #4 on: June 13, 2023, 09:44:55 PM »

just make sure steam wouldn't ruin the sound board...steam & plywood aren't very good friends..I have ruined a few 4 stop with wot water & steam , acetone etc.if you are going to re-use the blocks best to work around waxing method & leave the blocks alone I'd say.never worked fro me  :'(       
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA112/3/4 blocks
« Reply #5 on: June 13, 2023, 10:33:03 PM »

Why would you want to remove the blocks?  With a bit of ingenuity it’s possible to rewax and tune all the reeds with the blocks in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: HA112/3/4 blocks
« Reply #6 on: June 13, 2023, 11:30:48 PM »

I know that it’s possible to do the work with the blocks in situ, though I’ve only ever had to deal with the occasional reed or two myself.

I was just exploring other options that might facilitate a complete overhaul.

I suspect that if Hohner had made them removable, most of us would take advantage of this and work on the reedblocks outside of the box.

I’ve spent over 20 years carefully protecting my boxes from moisture and rapid temperature changes and so, Invadm’s comments in particular, (and an earlier miserable experiment,) have diverted me away from this option.

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: HA112/3/4 blocks
« Reply #7 on: June 14, 2023, 12:49:11 PM »

Why would you want to remove the blocks? 

In my case it was to replace a broken register slide.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: HA112/3/4 blocks
« Reply #8 on: June 14, 2023, 01:13:01 PM »

The only time I've done this was to reglue a block that must have escaped the quality control.
One end of one side of the block was starved of glue and air bled between reed chambers. It was where the two blocks touch.
I actually propped up the treble end at an angle and dripped boiling water from the kettle so it settled on the joint. I wiped it away immediately and dripped more boiling water on. I kept doing this until I could feel the timber get noticeably warmer then left a little water pooled on the joint to soak through.
It worked but the water didn't penetrate everywhere and when I eased the block off there was a little torn grain.
A little sanding and all was well. More scotch glue then everything back together - it was transformed. It turned out to be a cracking box. I'm still playing it regularly.

For the waxing of the reeds between the blocks I made a narrow spoon from a bean can and this lets me flow the wax down the joint. I'm pleased how clean and precise this allows me to work and I'm really quite quick now. I need to charge the tool for every joint, but this takes maybe 2 seconds and I know just how much wax is going to flow. Earlier on I was particularly pleased to gain control of the flat spoon technique but that's no good in the confined space. Bean tin tool is my answer.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal