Wiser folk than I will hopefully be along with a proper answer soon! 
My experience is that about a semitone up and a tone down is about as far as is comfortable. Solder weighting helps take a reed down but is far from ideal. Makers choose reed tongue sizes for good reasons.
To go from G down to D I think you'd want to move reeds about wherever possible and replace a few as necessary.
Agreed semitone up is usually ok, but it has to be done very carefully, especially on the highest notes. Low pitch reeds that are already weighted can often go up by a bigger interval by removing the weight. Conversely going down by filing the belly of the reed you can often change pitch by a bigger interval on the highest reeds because they are quite thick at the base so that although the reed tongue may be say 12mm from rivet to tip, maybe only half the length of the reed is vibrating. Low notes often have little 'spare' metal in the belly of the reeds and filing to lower the pitch will make the reed go noticeably flat when played hard.
I would try all other options before trying to tune from G down to D even by moving reeds to minimise filing.