Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner CF Presswood Repair  (Read 1419 times)

0 Members and 1 Guest are viewing this topic.

Amy Campbell

  • Member
  • *
  • Offline Offline
  • Posts: 6
Hohner CF Presswood Repair
« on: March 26, 2025, 10:02:26 PM »

I bought a Hohner CF Presswood very cheaply and aim to see about repairing it (following Lester's Hohner Hot Rodding videos where possible)!





Some of the reeds are leaky but the bellows seem not to be, at least not substantially, though two of the corners are taped(?). 



Someone has clearly done some work of very questionable quality on it in the past evidenced by the adhesive on the pallet board and the nails holding it in...removing it again might be problematic.



The right lateral face of the pallet board has a crack in it and a new shoulder strap has been added (or one side came off and was reattached eventually in a different position as evidenced by the adhesive residue and holes where it was previously screwed in)



Should be fun, I'm going to disassemble it this weekend and will post some photos of its insides when I do!
« Last Edit: March 26, 2025, 10:28:37 PM by Amy Campbell »
Logged

Amy Campbell

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: Hohner CF Presswood Repair
« Reply #1 on: March 27, 2025, 12:55:52 AM »

I got impatient and partially took it apart tonight so here are the photos ;D

Front grill removed:
 

Treble end:


Treble end with reed blocks removed:


Treble reed blocks:
 

 

Bellows internally:


Bass end with reed block removed:


Chord reed block:
 

Bass reed block:
 

So the main things I noticed are:
Most of the reeds are rusted to varying degrees and the leather valves are bending backwards.

There are some places where glue has been applied inside the bellows, to seal small holes, I presume.

Is there anything in particular that stands out to anyone in these photos that someone with novice eyes would miss?
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Hohner CF Presswood Repair
« Reply #2 on: March 28, 2025, 07:03:06 PM »

Looks like a full tear down to me. Enjoy the project.
Logged

Nigel Champion

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: Hohner CF Presswood Repair
« Reply #3 on: April 03, 2025, 12:05:08 AM »

Hi Amy.
As Pat says a full teardown is needed. 

Thankfully, the butcher who fitted the straps doesn't appear to have given the interior the same cavalier treatment.  It looks like he used an oversize/overlong screw to retain the palte for the treble levers that has gone through and torn the wood inside.

Apart from that butchery, this is in excellent condition for its age and very worthy of your effort. However removing all the reeds, cleaning them, replacing their leathers, and re-waxing is not for the faint-hearted or clumsy novice.

NB. The inside leathers are probably curved as well and sometimes the back of the reed is more rusty than the front.

Enjoy
Nigel
Logged

Amy Campbell

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: Hohner CF Presswood Repair
« Reply #4 on: April 08, 2025, 09:27:24 PM »

Apart from that butchery, this is in excellent condition for its age and very worthy of your effort. However removing all the reeds, cleaning them, replacing their leathers, and re-waxing is not for the faint-hearted or clumsy novice.

I am very much a clumsy novice so I have acquired some reed blocks from a PA that are in a slightly worse condition to these ones to practice on first!
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner CF Presswood Repair
« Reply #5 on: April 09, 2025, 07:54:46 AM »

Apart from that butchery, this is in excellent condition for its age and very worthy of your effort. However removing all the reeds, cleaning them, replacing their leathers, and re-waxing is not for the faint-hearted or clumsy novice.

I am very much a clumsy novice so I have acquired some reed blocks from a PA that are in a slightly worse condition to these ones to practice on first!


Excellent approach, achieves two important results, 1) you learn things amd 2) it kills a piano accordion (:)

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner CF Presswood Repair
« Reply #6 on: April 09, 2025, 11:36:51 AM »


Excellent approach, achieves two important results, 1) you learn things amd 2) it kills a piano accordion (:)

Gets my vote for post of the year so far  (:)
Logged
We're all doomed ...
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal