Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Does anybody make their own replacement buttons?  (Read 1052 times)

0 Members and 1 Guest are viewing this topic.

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Does anybody make their own replacement buttons?
« on: May 20, 2025, 03:36:47 PM »

My project box (presswood Hohner) has some button problems.  First, one of the bass buttons shattered when I tried to tap it into the lever fully.  Obviously the plastic gets brittle with age.  My second problem is that half the treble buttons are flat, and half are crowned. 

Basically, I need a complete set of proper buttons.  Finding such old style buttons as a set is near impossible.  I have considered making a set with silicone mold and epoxy resin.  I have also considered making a wooden set, but the ideal equipment would be a lathe, which I do not have.  The third option I have considered is having a set 3d printed, but the price to do that is, frankly, ridiculous.

Any advice on making a decent set of buttons?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Does anybody make their own replacement buttons?
« Reply #2 on: May 20, 2025, 04:47:26 PM »

Are the dimensions listed anywhere for both the treble and the bass?  Lack of proper dimensions is quite prohibitive.  Also, I cannot see the top of the button clearly, and would prefer the crowned profile.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Does anybody make their own replacement buttons?
« Reply #3 on: May 20, 2025, 04:55:46 PM »

I've done 3 types.
1) Wooden screw-in type with a hole in the middle - on a lathe (Have a look at local ads, something like a record DML24 can be had for £40 quid). Takes ages for a dozen buttons, as polishing is quite time consuming.
2) 3d printed plastic base with an M2 screw insert. I epoxy domed MoP cabochons on top of them, then screw the bases into the keyboard levers with bits of M2 threaded rod. 3d printing is cheap as chips - you must be asking the wrong people. Find a school kid with a 3d printer.
3) For bass side, Chopped up ABS rod in the right diameter with MoP cabochon epoxied on top. Bottom is drilled about 0.1mm smaller than the push rod, then rod is heated up and melted into the ABS base.

Given the price of ready-made MoP buttons, the cabochons work quite well and work out a lot cheaper.

Endless possibilities.
« Last Edit: May 20, 2025, 04:59:35 PM by mChavez »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Does anybody make their own replacement buttons?
« Reply #4 on: May 20, 2025, 04:56:49 PM »

Hohner have not made the crowned button for a long time, but the dimensions of treble buttons on two row Hohners has remained the same for approx a century so they will fit the space.
If you want crowned buttons then there are Italian buttons in production that would work. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Does anybody make their own replacement buttons?
« Reply #5 on: May 20, 2025, 06:52:54 PM »

I have an extra treble mech. with buttons & some bass buttons from press wood if you need older looking box. pm me your email for photos if any good to you.
« Last Edit: May 20, 2025, 10:05:04 PM by invadm »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Does anybody make their own replacement buttons?
« Reply #6 on: May 20, 2025, 09:44:15 PM »

When fitting Hohner buttons don't hit the button directly. Place a piece of softwood on top of the button and tap it lightly with a small hammer.
You could stick some leather on the wood for a softer touch.
« Last Edit: May 20, 2025, 10:38:04 PM by rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Does anybody make their own replacement buttons?
« Reply #7 on: May 22, 2025, 04:21:07 AM »

When fitting Hohner buttons don't hit the button directly. Place a piece of softwood on top of the button and tap it lightly with a small hammer.
You could stick some leather on the wood for a softer touch.

I did use a piece of soft wood, which was no help in this case.  It exploded where the metal inserts with very light tapping, so I think it was a goner anyway.  Might even have been a goner with strenuous playing.  .  I thank you for the tip about leather and will use it for all the other buttons. I decided to stop after one broken button.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal