Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Pokerwork, rust, cement  (Read 2824 times)

0 Members and 1 Guest are viewing this topic.

finnhorse

  • Guest
Hohner Pokerwork, rust, cement
« on: April 01, 2008, 07:14:39 AM »

I just opened the Pokerwork that I bought intent on making a cosmetic alteration.  I found something inside the box that I thought might be of minor interest to anyone who is cleaning up either a Pokerwork or one of those pre-Corso/pre-Erica Vienna-style boxes with a similar grille.

Regarding the age of the box: German made, flat buttons, plastic keyboard, orange bellows paper, gold bellows tape, T-reeds on both sides, cheesecloth on the grille. 

I intended to replace the grille cloth and also clean up some of the corrosion that there was on the outward facing side of the grille.  So I removed the grill, laid it flat and took a bit of medium sandpaper to the inside face where the cloth was fixed.  After a few passes, the cheesecloth disintegrated into dust and what was left sticking to the grill basically fell away.  Before replacing the cloth (I used black rayon with a little bit of sheen on one side), I thought it was necessary to clean off the dust from sanding, as well as wash off any other dirt that may have accumulated so the new glue would stick.  I put the whole grille in a water bath and started scrubbing it when I noticed something funny was happening.  On the inside face of the grille, the cement that Hohner used to fix the cloth in place was coming off completely and so was the rust that had accumulated there.  After I cleaned the thing, the inside of the grill looked better than the outside which still has some very minor oxidation (the reeds are fine, somehow.. from another box maybe?)

So it was interesting to me that Hohner would use a water-soluble glue to fix the screen.  It seems that while the box was being neglected by whichever previous owner, that glue acted like a sponge and sucked up atmospheric moisture and contributed to rusting the grille.  The rust on the inside face of the grille was isolated to the areas where the glue was present.

Maybe this "glue revelation" is common knowledge to most people, but it surprised me because if they used water-soluble glue for the grille, then by extension of that rationale Hohner may have used it for other parts of the construction as well.  If that's the case then it'd be even more important to keep the box away from moisture in the future.

I should have taken pictures.  The black rayon makes for a much nicer looking box, it really sets off the chrome.



 
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Hohner Pokerwork, rust, cement
« Reply #1 on: April 01, 2008, 01:35:33 PM »

I too removed the old white gauze from the grille of my Corona II and had the same surprise in finding that the glue dissolved in water. I installed a black mesh (actually a piece of black aluminum mosquito screen) and it looks much better that the original white cloth.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

finnhorse

  • Guest
Re: Hohner Pokerwork, rust, cement
« Reply #2 on: April 02, 2008, 12:24:51 AM »

I gave it some more thought, and using a water-based glue doesn't strike me as being particularly unusual.  It confused me at first, I guess I was expecting some kind of modern, industrial strength "super" cement.  But there's no reason to use anything that expensive. 

Taking a closer look at the cloth before I sanded it off, it looked like every fiber was impregnated with glue.  It would seem that the factory just soaked a pre-cut strip before applying it to the grille.  If that's the case, then hundreds of instruments could have been furbished for very little cloth and adhesive.

More innovation from Hohner's long-standing tradition of cost-cutting!  By comparison, it makes the chrome and square-knit cloth of an old Corona (50's, 60's) look like a Cadillac.  It's a shame, really.  On one hand, it's a cost effective measure; but I don't think they realized that the glue would end up corroding the box from the inside-out.  To be fair, I can't vouch for what type of neglectful storage conditions the box saw before I bought it. 

But I was really surprised when the rust just washed off!  Some steel wool and WD40 did the outside face and now it's virtually spot free.  The whole thing looks great, it's a wonder they didn't do it themselves before selling.   
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal